PUBLICATIONS
Author: Toledano A, Serrano L, Labidi J.
Name: Enhancement of Lignin Production from Olive Tree Pruning integrated in a Green Biorefinery
Reference: (2011) Industrial & Engineering Chemistry Research, 50(11), 6573-6579.
Author: Cristina Sánchez, Itziar Egüés, Rodrigo Llano-Ponte, Jalel Labidi
Name: Acid-and base-catalized hydrolysis of corn stalk
Reference: (2011) Biorecourses, 6(2) 1830-1842
Author: Araceli García, María González Alriols, Rodrigo Llano-Ponte, Jalel Labidi
Name: Ultrasound-assisted fractionation of the lignocellulosic material
Reference: (2011) Bioresource Technology, 102(10), 6326-6330
Author: Quijera JA, Alriols MG, Labidi, J.
Name: Integration of a solar thermal system in a dairy process
Reference: (2011) Renewable Energy, 36(6), 1843-1853.
Author: Serrano, L., Urruzola, I., Nemeth, D., Belafi-Bako, K., Labidi, J.
Name: Modified cellulose microfibrils as benzene adsorbent
Reference: (2011) Desalination, 270( 1-3), 143-150
Author: García, A., Alriols, M.G., Llano-Ponte, R., Labidi, J.
Name: Energy and economic assessment of soda and organosolv biorefinery processes
Reference: (2011) Biomass and Bioenergy, 35(1), 516-525.
Author: Mujika F, Pujana J, Olave M.
Name: On the determination of out-of-plane elastic properties of honeycomb sandwich panels
Reference: Polym Test 2011;30(2):222-28
Author: Vargas G, Mujika F.
Name: Determination of in-plane shear properties by three-point flexure test of +/- 45 degrees anti-symmetric laminates
Reference: Polym Test 2011;30(2):204-15
Author: Romera JM, Adarraga I, Cantera MA, Mujika F.
Name: Numerical analysis of displacement and stress fields of off-axis composites in three-point flexure
Reference: J Compos Mater 2011;45(6):671-82
Author: Corcuera, Ma. Angeles; Rueda, Lorena; Saralegui, Ainara; Martin, Ma. Dolores; Fernandez-dArlas, Borja; Mondragon, Inaki; Eceiza, Arantxa
Name: Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources
Reference: Journal of Applied Polymer Science (2011), 122(6), 3677-3685
Author: Garate, Hernan; Mondragon, Inaki; Goyanes, Silvia; DAccorso, Norma B.
Name: Controlled epoxidation of poly(styrene-b-isoprene-b-styrene) block copolymer for the development of nanostructured epoxy thermosets
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2011), 49(20), 4505-4513
Author: Lombardi, Mariangela; Guerriero, Andrea; Kortaberria, Galder; Mondragon, Inaki; Sangermano, Marco; Montanaro, Laura
Name: Effect of the ceramic filler features on the properties of photopolymerized BaTiO3-acrylic composites
Reference: Polymer Composites (2011), 32(8), 1304-1312
Author: Briones, Rodrigo; Serrano, Luis; Ben Younes, Rached; Mondragon, Inaki; Labidi, Jalel
Name: Polyol production by chemical modification of date seeds
Reference: Industrial Crops and Products (2011), 34(1), 1035-1040
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Martin, Loli; Mondragon, Inaki
Name: Electrical properties of TiO2/SEO nanocomposites: From macro to nano
Reference: Electrochimica Acta (2011), 56(16), 5582-5586
Author: Fernandez-dArlas, Borja; Khan, Umar; Rueda, Lorena; Coleman, Jonathan N.; Mondragon, Inaki; Corcuera, Maria A.; Eceiza, Arantxa
Name: Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites
Reference: Composites Science and Technology (2011), 71(8), 1030-1038
Author: Rueda, Lorena; Garcia, Inaki; Palomares, Teodoro; Alonso-Varona, Ana; Mondragon, Inaki; Corcuera, Marian; Eceiza, Arantxa
Name: The role of reactive silicates on the structure/property relationships and cell response evaluation in polyurethane nanocomposites
Reference: Journal of Biomedical Materials Research, Part A (2011), 97A(4), 480-489
Author: Fernandez, Raquel; Zalakain, Inaki; Ramos, Jose Angel; Martin, Loli; Mondragon, Inaki
Name: Morphological study and photo-addressing in poly(styrene-b-butadiene-b-styrene) block copolymers with azobenzene groups and polystyrene matrix: Influence of chemical bonding
Reference: European Polymer Journal (2011), 47(5), 1176-1185
Author: Gabilondo, Nagore; Martin, Loli; Retegi, Alona; Mondragon, Inaki; Berglund, Lars
Name: Property tailoring of phenol-formaldehyde matrices by control of reactant molar ratio and thermoplastic modification
Reference: Polymer International (2011), 60(5), 851-858
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.; Vescovo, L.; Sangermano, M.
Name: Dynamics of in situ synthetized silver-epoxy nanocomposites as studied by dielectric relaxation spectroscopy
Reference: Journal of Applied Polymer Science (2011), 120(4), 2361-2367
Author: Peponi, L.; Tercjak, A.; Martin, L.; Mondragon, I.; Kenny, J. M.
Name: Morphology-properties relationship on nanocomposite films based on poly(styrene-block-diene-block-styrene) copolymers and silver nanoparticles
Reference: eXPRESS Polymer Letters (2011), 5(2), 104-118
Author: Castro, Cristina; Zuluaga, Robin; Putaux, Jean-Luc; Caro, Gloria; Mondragon, Inaki; Ganan, Piedad
Name: Structural characterization of bacterial cellulose produced by Gluconacetobacter swingsii sp. from Colombian agroindustrial wastes
Reference: Carbohydrate Polymers (2011), 84(1), 96-102
Author: Zalakain, Inaki; Ramos, Jose Angel; Fernandez, Raquel; Etxeberria, Haritz; Mondragon, Inaki
Name: Nanostructuration of self-assembled poly(styrene-b-isoprene-b-styrene) block copolymer thin films in a highly oriented pyrolytic graphite substrate
Reference: Thin Solid Films (2011), 519(6), 1882-1885
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Mondragon, Inaki
Name: Conductive Properties of Photoluminescent Au/Ps-b-PEO Inorganic/Organic Hybrids Containing Nematic Liquid Crystals
Reference: Journal of Physical Chemistry C (2011), 115(5), 1643-1648
Author: Fernandez-dArlas, B.; Rueda, L.; Fernandez, R.; Khan, U.; Coleman, J. N.; Mondragon, I.; Eceiza, A.
Name: Inverting Polyurethanes Synthesis: Effects on Nano/Micro-Structure and Mechanical Properties
Reference: Soft Materials (2011), 9(1), 79-93
Author: García, A., Toledano, A., Andrés, M.A., Labidi, J.
Name: Study of the antioxidant capacity of Miscanthus sinensis lignins
Reference: (2010) Process Biochemistry, 45 (6), pp. 935-940.
Author: Egües, I., González Alriols, M., Herseczki, Z., Marton, G, Labidi, J.
Name: Hemicelluloses obtaining from rapeseed cake residue generated in the biodiesel production process
Reference: Journal of Industrial and Engineering Chemistry (2010), 16, 293–298.
Author: L. Serrano, I. Egues, M. Gonzalez Alriols, R. Llano-Ponte, J. Labidi
Name: Miscanthus sinensis fractionation by different reagents
Reference: Chemical Engineering Journal (2010), 156(1), 49-55
Author: M. Gonzalez Alriols, A. Garcia, R. Llano-ponte, J. Labidi
Name: Combined organosolv and ultrafiltration lignocellulosic biorefinery process
Reference: Chemical Engineering Journal (2010), 157(1), 113-120.
Author: Arrese A, Carbajal N, Vargas G, Mujika F.
Name: A new method for determining mode II R-curve by the End-Notched Flexure test
Reference: Eng Fract Mech 2010;77(1):51-70
Author: Vargas G, Mujika F.
Name: Determination of In-plane Shear Strength of Unidirectional Composite Materials Using the Off-axis Three-point Flexure and Off-axis Tensile Tests
Reference: J Compos Mater 2010;44(21):2487-507
Author: Tercjak, Agnieszka; Mondragon, Inaki
Name: Polymer dispersed liquid crystal, thermotropic and other responsive epoxy polymers
Reference: Epoxy Polymers (2010), 121-136
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Mondragon, Inaki
Name: Transparent Nanostructured Thermoset Composites Containing Well-Dispersed TiO2 Nanoparticles
Reference: Journal of Physical Chemistry C (2010), 114(51), 22424-22430
Author: Fernandez, Raquel; Zalakain, Inaki; Ramos, Jose Angel; Galante, Maria J.; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Fabrication of surface-relief gratings on an azobenzene-containing epoxy-based polymer film using atomic force microscopy
Reference: Polymer International (2010), 59(10), 1422-1427
Author: Remiro, Pedro M.; De La Caba, Koro; Mondragon, Inaki; Riccardi, Carmen C.
Name: Influence of phenoxy addition on the curing kinetics for uncatalyzed and catalyzed cyanate ester resin
Reference: Journal of Applied Polymer Science (2010), 118(5), 2869-2880
Author: Corcuera, M. A.; Rueda, L.; Fernandez dArlas, B.; Arbelaiz, A.; Marieta, C.; Mondragon, I.; Eceiza, A.
Name: Microstructure and properties of polyurethanes derived from castor oil
Reference: Polymer Degradation and Stability (2010), 95(11), 2175-2184
Author: Castro, Cristian; Gargallo, Ligia; Radic, Deodato; Kortaberria, Galder; Mondragon, Inaki
Name: Blends containing chitosan and poly(sodium-4-styrene sulphonate) Compatibility behavior
Reference: Carbohydrate Polymers (2011), 83(1), 81-87
Author: Vescovo, Lorenzo; Sangermano, Marco; Scarazzini, Riccardo; Kortaberria, Galder; Mondragon, Inaki
Name: In-situ-Synthesized Silver/Epoxy Nanocomposites: electrical Characterization by Means of Dielectric Spectroscopy
Reference: Macromolecular Chemistry and Physics (2010), 211(17), 1933-1939
Author: Felisberto, Marcos; Sacco, Leandro; Mondragon, Inaki; Rubiolo, Gerardo H.; Candal, Roberto J.; Goyanes, Silvia
Name: The growth of carbon nanotubes on large areas of silicon substrate using commercial iron oxide nanoparticles as a catalyst
Reference: Materials Letters (2010), 64(20), 2188-2190
Author: Diaz Costanzo, Guadalupe; Ledesma, Silvia; Mondragon, Inaki; Goyanes, Silvia
Name: Stable Solutions of Multiwalled Carbon Nanotubes Using an Azobenzene Dye
Reference: Journal of Physical Chemistry C (2010), 114(34), 14347-14352
Author: Sánchez, R., Ferrer, A., Serrano, L., Toledano, A., Labidi, J., Rodríguez, A.
Name: Hesperaloe funifera as a raw material for integral utilization of its components
Reference: (2011) BioResources, 6 (1), pp. 3-21.
Author: Castro, Cristian; Gargallo, Ligia; Radic, Deodato; Mondragon, Inaki; Kortaberria, Galder
Name: Blends of chitosan and poly(sodium-4-styrene sulphonate). Compatibilization by lysine and glutamic acid
Reference: Carbohydrate Polymers (2010), 82(3), 795-801
Author: Corcuera, Ma Angeles; Rueda, Lorena; Fernandez dArlas, Borja; Saralegui, Ainara; Marieta, Cristina; Arbelaiz, Aitor; Mondragon, Inaki; Eceiza, Arantxa
Name: Effect of Diisocyanate Structure on Thermal Properties and Microstructure of Polyurethanes Based on Polyols Derived from Renewable Resources
Reference: AIP Conference Proceedings (2010), 1255(Vth International Conference on Times of Polymers (TOP) and Composites, 2010), 290-293
Author: Araneda, E.; Gargallo, L.; Leiva, A.; Hadjichristidis, N.; Mondragon, I.; Radic, D.
Name: Blends of PEO in Poly(ethylene oxide)/Poly(2-vinyl pyridine)-b-poly(ethylene oxide)
Reference: AIP Conference Proceedings (2010), 1255(Vth International Conference on Times of Polymers (TOP) and Composites, 2010), 276-277
Author: Ocando, Connie; Tercjak, Agnieszka; Mondragon, Inaki
Name: Nanostructured systems based on SBS epoxidized triblock copolymers and well-dispersed alumina/epoxy matrix composites
Reference: Composites Science and Technology (2010), 70(7), 1106-1112
Author: Pena, Cristina; de la Caba, Koro; Eceiza, Arantxa; Ruseckaite, Roxana; Mondragon, Inaki
Name: Enhancing water repellence and mechanical properties of gelatin films by tannin addition
Reference: Bioresource Technology (2010), 101(17), 6836-6842
Author: Retegi, A.; Gabilondo, N.; Pena, C.; Zuluaga, R.; Castro, C.; Ganan, P.; La Caba, K.; Mondragon, I.
Name: Bacterial cellulose films with controlled microstructure-mechanical property relationships
Reference: Cellulose (Dordrecht, Netherlands) (2010), 17(3), 661-669
Author: Peponi, Laura; Tercjak, Agnieszka; Gutierrez, Junkal; Cardinali, Marta; Mondragon, Inaki; Valentini, Luca; Kenny, Jose M.
Name: Mapping of carbon nanotubes in the polystyrene domains of a polystyrene-b-polyisoprene-b-polystyrene block copolymer matrix using electrostatic force microscopy
Reference: Carbon (2010), 48(9), 2590-2595
Author: Retegi, Alona; Martin, Loli; Stefani, Pablo M.; Zuluaga Gallego, Robin; Ganan, Piedad; Mondragon, Inaki; Algar, Inaki
Name: Epoxidized soy bean oil/bacterial cellulose biocomposites
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Castro, Cristina I.; Zuluaga, Robin O.; Caro, Gloria; Putaux, Jean L.; Retegui, Alona; Mondragon, Inaki; Ganan, Piedad
Name: Production and characterization of bacterial cellulose from agroindustrial pineapple wastes
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Zuluaga Gallego, Robin O.; Castro Herazo, Cristina I.; Echeverry, Deicy L.; Velez, Lina M.; Hincapie Llanos, Gustavo A.; Mondragon, Inaki; Ganan Rojo, Piedad F.
Name: ATR-FTIR Analysis of changing cellulose crystalline structure in developing of pseudosteam of Musaceae plants
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Blanco, Miren; Lopez, Marta; Kortaberria, Galder; Mondragon, Inaki
Name: Nanostructured thermosets from self-assembled amphiphilic block copolymer/epoxy resin mixtures: effect of copolymer content on nanostructures
Reference: Polymer International (2010), 59(4), 523-528
Author: Toledano, A.; Garcia, A.; Mondragon, I.; Labidi, J.
Name: Lignin separation and fractionation by ultrafiltration
Reference: Separation and Purification Technology (2010), 71(1), 38-43
Author: Toledano, A.; Serrano, L.; Garcia, A.; Mondragon, I.; Labidi, J.
Name: Comparative study of lignin fractionation by ultrafiltration and selective precipitation
Reference: Chemical Engineering Journal (Amsterdam, Netherlands) (2010), 157(1)
Author: Serrano, Luis; Alriols, Maria Gonzalez; Briones, Rodrigo; Mondragon, Inaki; Labidi, Jalel
Name: Oxypropylation of Rapeseed Cake Residue Generated in the Biodiesel Production Process
Reference: Industrial & Engineering Chemistry Research (2010), 49(4), 1526-1529
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Mondragon, Inaki
Name: Conductive Behavior of High TiO2 Nanoparticle Content of Inorganic/Organic Nanostructured Composites
Reference: Journal of the American Chemical Society (2010), 132(2), 873-878
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Ocando, Connie; Mondragon, Inaki
Name: Conductive Properties of Switchable Photoluminescence Thermosetting Systems Based on Liquid Crystals
Reference: Langmuir (2010), 26(6), 4296-4302
Author: Pena Cristina; de la Caba Koro; Eceiza Arantxa; Ruseckaite Roxana; Mondragon Inaki
Name: Enhancing water repellence and mechanical properties of gelatin films by tannin addition
Reference: Bioresource technology (2010), 101(17), 6836-42
Author: Tercjak Agnieszka; Gutierrez Junkal; Ocando Connie; Mondragon Inaki
Name: Conductive properties of switchable photoluminescence thermosetting systems based on liquid crystals
Reference: Langmuir : The ACS journal of surfaces and colloids (2010), 26(6), 4296-302
Author: Gutierrez Junkal; Tercjak Agnieszka; Mondragon Inaki
Name: Conductive behavior of high TiO2 nanoparticle content of inorganic/organic nanostructured composites
Reference: Journal of the American Chemical Society (2010), 132(2), 873-8
Author: Araceli García, María González, Rodrigo Llano-Ponte, Jalel Labidi
Name: Energy Optimization of a Kraft Pulp Mill
Reference: Computer Aided Chemical Engineering (2009), 27, 417-422.
Author: Garcia, A. Toledano, L. Serrano, I. Egues, M. Gonzalez, F. Marin, J. Labidi
Name: Characterization of lignins obtained by selective precipitation
Reference: Separation and Purification Technology (2009), 68(2), 193-198.
Author: Carbajal N, Mujika F.
Name: Determination of compressive strength of unidirectional composites by three-point bending tests.
Reference: Polym Test 2009;28(2):150-6
Author: Carbajal N, Mujika F.
Name: Determination of longitudinal compressive strength of long fiber composites by three-point bending of [0(m)/90(n)/0(p)] cross-ply laminated strips
Reference: Polym Test 2009;28(6):618-26
Author: Vargas G, Arrese A, Carbajal N, Mujika F.
Name: Analysis of In-plane and Out-of-plane Thermo-mechanical Stresses in Un-symmetric Cross-ply Curved Laminated Strips
Reference: J Compos Mater 2009;43(25):3157-84
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Variation on the properties of silver nanoparticles nanocomposites based on SIS and SBS block copolymer
Reference: Special Topics on Materials Science and Technology: An Italian Panorama, [Selected Papers presented at the National Conference], 9th, Napoli, Italy, June 29-July 2, 2008 (2009), Meeting Date 2008, 295-302
Author: Tercjak, Agnieszka; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Blanco, Miren; Mondragon, Inaki
Name: Molecular dynamics of block copolymers by means of dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 163-186
Author: Blanco, Miren; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Mondragon, Inaki
Name: Nanocomposites based on polymer matrix and carbon nanotubes as studied by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 127-161
Author: Arruti, Puy; Kortaberria, Galder; Jimeno, Amaia; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Molecular dynamics in polymer/clay nanocomposites investigated by dielectric relaxation spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 97-125
Author: Mondragon, Inaki; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren
Name: Molecular dynamics during crystallization of biodegradable polymers as monitored by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 69-96
Author: Jimeno, Amaia; Kortaberria, Galder; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Dynamics and dielectric properties of polymer/nanoparticle nanocomposites by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 31-67
Author: Blanco, M.; Lopez, M.; Fernandez, R.; Martin, L.; Riccardi, C. C.; Mondragon, I.
Name: Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Kinetics and miscibility study
Reference: Journal of Thermal Analysis and Calorimetry (2009), 97(3), 969-978
Author: Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Dynamics of deoxyribonucleic acid as studied by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 1-29
Author: Escobar, M.; Goyanes, S.; Corcuera, M. A.; Eceiza, A.; Mondragon, I.;Rubiolo, G. H.; Candal, R. J.
Name: Purification and functionalization of carbon nanotubes by classical and advanced oxidation processes
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6228-6233
Author: Jimeno,A.; Goyanes, S.; Eceiza, A.; Kortaberria, G.; Mondragon, I.; Corcuera, M. A.
Name: Effects of amine molecular structure on carbon nanotubes functionalization
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6222-6227
Author: Fernandez dArlas, B.; Goyanes, S.; Rubiolo, G. H.; Mondragon, I.; Corcuera, M. A.; Eceiza, A.
Name: Surface modification of multiwalled carbon nanotubes via esterification using a biodegradable polyol.
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6064-6071
Author: Peponi, Laura; Tercjak, Agnieszka; Verdejo, Raquel; Lopez-Manchado, Miguel Angel; Mondragon, Inaki; Kenny, Jose M.
Name: Confinement of functionalized graphene sheets by triblock copolymers
Reference: Journal of Physical Chemistry C (2009), 113(42), 17973-17978
Author: De Falco, Alejandro; Fascio, Mirta L.; Lamanna, Melisa E.; Corcuera, Maria A.; Mondragon, Inaki; Rubiolo, Gerardo H.; DAccorso, Norma B.; Goyanes, Silvia
Name: Thermal treatment of the carbon nanotubes and their functionalization with styrene
Reference: Physica B: Condensed Matter (Amsterdam, Netherlands) (2009), 404(18), 2780-2783
Author: Blanco, Miren; Lopez, Marta; Alvarez De Arcaya, Patricia; Ramos, Jose Angel; Kortaberria, Galder; Riccardi, Carmen Cristina; Mondragon, Inaki
Name: Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures: Morphology, thermal behavior, and mechanical properties
Reference: Journal of Applied Polymer Science (2009), 114(3), 1753-1760
Author: Tercjak, A.; Gutierrez, J.; Ocando, C. J.; Peponi, L.; Mondragon, I.
Name: Thermoresponsive inorganic/organic hybrids based on conductive TiO2 nanoparticles embedded in poly(styrene-b-ethylene oxide) block copolymer dispersed liquid crystals
Reference: Acta Materialia (2009), 57(15), 4624-4631
Author: Ocando, Connie; Tercjak, Agnieszka; Martin, M. Dolores; Ramos, Jose A.; Campo, Monica; Mondragon, Inaki
Name: Morphology Development in Thermosetting Mixtures through the Variation on Chemical Functionalization Degree of Poly(styrene-b-butadiene) Diblock Copolymer Modifiers. Thermomechanical Properties
Reference: Macromolecules (Washington, DC, United States) (2009), 42(16), 6215-6224
Author: Gutierrez, J.; Tercjak, A.; Garcia, I.; Mondragon, I.
Name: The effect of thermal and vapor annealing treatments on the self-assembly of TiO2/PS-b-PMMA nanocomposites generated via the sol-gel process
Reference: Nanotechnology (2009), 20(22), 225603/1-225603/9
Author: Fernandez, Raquel; dArlas, Borja Fernandez; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B.
Reference: Thermochimica Acta (2009), 493(1-2), 6-13
Author: Ramos, Jose Angel; Blanco, Miren; Zalakain, Inaki; Mondragon, Inaki
Name: Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics
Reference: Journal of Colloid and Interface Science (2009), 336(2), 431-437
Author: Peponi, Laura; Valentini, Luca; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Surfactant assisted selective confinement of carbon nanotubes functionalized with octadecylamine in a poly(styrene-b-isoprene-b-styrene) block copolymer matrix
Reference: Carbon (2009), 47(10), 2474-2480
Author: Rueda-Larraz, L.; dArlas, B. Fernandez; Tercjak, A.; Ribes, A.; Mondragon, I.; Eceiza, A
Name: Synthesis and microstructure-mechanical property relationships of segmented polyurethanes based on a PCL-PTHF-PCL block copolymer as soft segment
Reference: European Polymer Journal (2009), 45(7), 2096-2109
Author: De Falco, A.; Marzocca, A. J.; Corcuera, M. A.; Eceiza, A.; Mondragon, I.; Rubiolo, G. H.; Goyanes, S.
Name: Accelerator adsorption onto carbon nanotubes surface affects the vulcanization process of styrene-butadiene rubber composites
Reference: Journal of Applied Polymer Science (2009), 113(5), 2851-2857
Author: Blanco, M.; Ramos, J. A.; Goyanes, S.; Rubiolo, G.; Salgueiro, W.; Somoza, A.; Mondragon, I.
Name: Intermolecular interactions on amine-cured epoxy matrices with different crosslink densities. Influence on the hole and specific volumes and the mechanical behavior
Reference: Journal of Polymer Science, Part B: Polymer Physics (2009), 47(13), 1240-1252
Author: Pena, C.; Caba, K.; Retegi, A.; Ocando, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Mimosa and chestnut tannin extracts reacted with hexamine in solution
Reference: Journal of Thermal Analysis and Calorimetry (2009), 96(2), 515-521
Author: Lopez, M.; Blanco, M.; Vazquez, A.; Ramos, J. A.; Arbelaiz, A.; Gabilondo, N.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of resol-clay nanocomposites
Reference: Journal of Thermal Analysis and Calorimetry (2009), 96(2), 567-573
Author: Fernandez, R.; Mondragon, I.; Galante, M.; Oyanguren, P.
Name: Influence of chromophore concentration and network structure on the photo-orientation properties of crosslinked epoxy-based azopolymers
Reference: Journal of Polymer Science, Part B: Polymer Physics (2009), 47(10), 1004-1014
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Peponi, Laura; Mondragon, Inaki
Name: Conductive Properties of Inorganic and Organic TiO2/Polystyrene-block-Poly(ethylene oxide) Nanocomposites
Reference: Journal of Physical Chemistry C (2009), 113(20), 8601-8605
Author: Fernandez, Raquel; Blanco, Miren; Galante, Maria J.; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Polymerization of an epoxy resin modified with azobenzene groups monitored by near-infrared spectroscopy
Reference: Journal of Applied Polymer Science (2009), 112(5), 2999-3006
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Peponi, Laura; Rueda, Lorena; Mondragon, Inaki
Name: Arrangement of Conductive TiO2 Nanoparticles in Hybrid Inorganic/Organic Thermosetting Materials Using Liquid Crystal
Reference: Macromolecules (Washington, DC, United States) (2009), 42(9), 3386-3390.
Author: Zuluaga, Robin; Mondragon, Inaki; Ganan, Piedad
Name: New approaches to cellulose microfibril isolation from Musaceae agro-industrial residues Composite
Reference: Interfaces (2009), 16(1), 27-37
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(3), 2128-2139
Author: Zuluaga, Robin; Putaux, Jean Luc; Castro, Cristina; Mondragon, Inaki; Ganan, Piedad
Name: Influence of mechanical treatment on the morphology of cellulose microfibrils isolated from banana rachis
Reference: Abstracts of Papers, 237th ACS National Meeting, Salt Lake City, UT, United States, March 22-26, 2009
Author: Serrano, E.; Kortaberria, G.; Arruti, P.; Tercjak, A.; Mondragon, I.
Name: Molecular dynamics of an epoxy resin modified with an epoxidized poly(styrene-butadiene) linear block copolymer during cure and microphase separation processes
Reference: European Polymer Journal (2009), 45(4), 1046-1057
Author: Alvarez de Arcaya, Patricia; Retegi, Alona; Arbelaiz, Aitor; Kenny, Jose Maria; Mondragon, Inaki
Name: Mechanical properties of natural fibers/polyamides composites
Reference: Polymer Composites (2009), 30(3), 257-264
Author: Alriols, M. Gonzalez; Tejado, A.; Blanco, M.; Mondragon, I.; Labidi, J.
Name: Agricultural palm oil tree residues as raw material for cellulose, lignin and hemicelluloses production by ethylene glycol pulping process
Reference: Chemical Engineering Journal (Amsterdam, Netherlands) (2009), 148(1), 106-114
Author: Fernandez, Raquel; Mondragon, Inaki; Galante, Maria J.; Oyanguren, Patricia A.
Name: Bonding and molecular environment effects on photoorientation in epoxy-based polymers having azobenzene units
Reference: European Polymer Journal (2009), 45(3), 788-794
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Nanostructured physical gel of SBS block copolymer and Ag/DT/SBS nanocomposites
Reference: Journal of Materials Science (2009), 44(5), 1287-1293
Author: Zuluaga, Robin; Putaux, Jean Luc; Cruz, Javier; Velez, Juan; Mondragon, Inaki; Ganan, Piedad
Name: Cellulose microfibrils from banana rachis: Effect of alkaline treatments on structural and morphological features
Reference: Carbohydrate Polymers (2009), 76(1), 51-59
Author: Ramos, J. A.; Larranaga, M.; Mondragon, I.; Salgueiro, W.; Somoza, A.;Goyanes, S.; Rubiolo, G. H.
Name: Correlation between nanohole volume and mechanical properties of amine-cured epoxy resin blended with poly(ethylene oxide)
Reference: Polymers for Advanced Technologies (2009), 20(1), 35-38
Author: Escobar M; Goyanes S; Corcuera M A; Eceiza A; Mondragon I; Rubiolo G H; Candal R J
Name: Purification and functionalization of carbon nanotubes by classical and advanced oxidation processes
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6228-33
Author: Jimeno A; Goyanes S; Eceiza A; Kortaberria G; Mondragon I; Corcuera M A
Name: Effects of amine molecular structure on carbon nanotubes functionalization
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6222-7
Author: Fernandez dArlas B; Goyanes S; Rubiolo G H; Mondragon I; Corcuera M A; Eceiza A.
Name: Surface modification of multiwalled carbon nanotubes via esterification using a biodegradable polyol
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6064-71
Author: Ramos Jose Angel; Blanco Miren; Zalakain Inaki; Mondragon Inaki
Name: Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics
Reference: Journal of colloid and interface science (2009), 336(2), 431-7
Author: Gutierrez J; Tercjak A; Garcia I; Mondragon I
Name: The effect of thermal and vapor annealing treatments on the self-assembly of TiO2/PS-b-PMMA nanocomposites generated via the sol-gel process
Reference: Nanotechnology (2009), 20(22), 225603
Author: Peponi Laura; Tercjak Agnieszka; Torre Luigi; Kenny Jose M; Mondragon Inaki
Name: Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites
Reference: Journal of nanoscience and nanotechnology (2009), 9(3), 2128-39
Author: A. Rodríguez, L. Serrano, A. Moral, L. Jiménez
Name: Pulping of rice straw with high-boiling point organosolv solvents
Reference: Biochemical Engineering Journal (2008), 42, 243-247.
Author: M. González, L. Canton, A. Rodriguez, J. Labidi
Name: Effect of organosolv and soda pulping process on the metals conten of non-woody pulps
Reference: Bioresource Technology (2008) 99(14) 6621-6625
Author: Jalel Labidi, Alvaro Tejado, Araceli García, Luis Jiménez
Name: Simulation of tagasaste pulping using soda-anthraquinone
Reference: Bioresource Technology, (2008), 99(15), 7270-7277
Author: Maria González, Álvaro Tejado, Cristina Peña, Jalel Labidi
Name: Organosolv pulping processes simulations
Reference: Industrial & Engineering Chemistry Research, (2008), 47(6), 1903-1909
Author: Alejandro Rodríguez, Ana Moral, Luis Serrano, Luis Jiménez, Jalel Labidi
Name: Rice straw pulp obtained by using various methods
Reference: Bioresource Technology (2008), 99(8), 2881-2886
Author: Tejado, A.; Kortaberria, G.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of novolac-type lignophenolic resins cure
Reference: Thermochimica Acta (2008), 471(1-2), 80-85
Author: A. Rodríguez, L. Serrano, A. Moral, A. Pérez and L. Jiménez
Name: Use of high-boiling point organic solvents for pulping oil palm empty fruit bunches
Reference: Bioresource Technology (2008), 99(6), 1743-1749
Author: Carbajal N, Vargas G, Arrese A, Mujika F.
Name: Analysis of thermal stresses in unsymmetric cross-ply composite strips
Reference: J Compos Mater 2008;42(12):1247-66
Author: Arrese A, Mujika F.
Name: Influence of bending rotations on three and four-point bend end notched flexure tests
Reference: Eng Fract Mech 2008;75(14):4234-46
Author: Ocando, Connie; Tercjak, Agnieszka; Serrano, Elena; Ramos, Jose A.; Corona-Galvan, Sergio; Parellada, M. Dolores; Fernandez-Berridi, M. Jose; Mondragon, Inaki
Name: Micro- and macrophase separation of thermosetting systems modified with epoxidized styrene-block-butadiene-block-styrene linear triblock copolymers and their influence on final mechanical properties
Reference: Polymer International (2008), 57(12), 1333-1342
Author: Freire, Carmen S. R.; Silvestre, Armando J. D.; Pascoal Neto, Carlos; Gandini, Alessandro; Martin, Loli; Mondragon, Inaki
Name: Composites based on acylated cellulose fibers and low-density polyethylene: Effect of the fiber content, degree of substitution and fatty acid chain length on final properties
Reference: Composites Science and Technology (2008), 68(15-16), 3358-3364
Author: Vazquez, A.; Lopez, M.; Serrano, E.; Valea, A.; Zafeiropoulos, N. E.; Mondragon, I.
Name: Structural and ordering behavior of lamellar polystyrene-block-polybutadiene-block-polystyrene triblock copolymer containing layered silicates
Reference: Journal of Applied Polymer Science (2008), 110(6), 3624-3637
Author: Olmos, D.; Baselga, J.; Mondragon, I.; Gonzalez-Benito, J.
Name: The effect of surface modification of silica microfillers in an epoxy matrix on the thermo-mechanical properties
Reference: Journal of Adhesion Science and Technology (2008), 22(13), 1443-1459
Author: Garcia, Ignacio; Tercjak, Agnieszka; Rueda, Lorena; Mondragon, Inaki
Name: Self-Assembled Nanomaterials Using Magnetic Nanoparticles Modified with Polystyrene Brushes and Poly(styrene-b-butadiene-b-styrene)
Reference: Macromolecules (Washington, DC, United States) (2008), 41(23),9295-9298
Author: Tercjak, Agnieszka; Serrano, Elena; Garcia, Inaki; Mondragon, Inaki
Name: Thermoresponsive meso/nanostructured thermosetting materials based on PS-b-PEO block copolymer-dispersed liquid crystal: Curing behavior and morphological variation
Reference: Acta Materialia (2008), 56(18), 5112-5122.
Author: Peponi, Laura; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Morphology and rheological behaviour of Ag-SBS nanocomposite gels
Reference: AIP Conference Proceedings (2008), 1042(IVth International Conference on Times of Polymers (TOP) and Composites, 2008), 272-275
Author: Tercjak, Agnieszka; Mondragon, Inaki
Name: Relationships between the Morphology and Thermoresponsive Behavior in Micro/Nanostructured Thermosetting Matrixes Containing a 4-(Hexyloxy)-4-biphenylcarbonitrile Liquid Crystal
Reference: Langmuir (2008), 24(19), 11216-11224
Author: Vazquez, A.; Lopez, M.; Kortaberria, G.; Martin, L.; Mondragon, I.
Name: Modification of montmorillonite with cationic surfactants. Thermal and chemical analysis including CEC determination
Reference: Applied Clay Science (2008), 41(1-2), 24-36
Author: Tercjak, A.; Garcia, I.; Mondragon, I.
Name: Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal
Reference: Nanotechnology (2008), 19(27), 275701/1-275701/5
Author: Garcia, I.; Tercjak, A.; Gutierrez, J.; Rueda, L.; Mondragon, I.
Name: Nanostructuration via Solvent Vapor Exposure of Poly(2-vinyl pyridine-b-methyl methacrylate) Nanocomposites Using Modified Magnetic Nanoparticles
Reference: Journal of Physical Chemistry C (2008), 112(37), 14343-14347
Author: Peponi, Laura; Tercjak, Agnieszka; Gutierrez, Junkal; Stadler, Hartmut; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Self-assembling of SBS block copolymers as templates for conductive silver nanocomposites
Reference: Macromolecular Materials and Engineering (2008), 293(7), 568-573
Author: Kortaberria, G.; Arruti, P.; Jimeno, A.; Mondragon, I.; Sangermano, M.
Name: Local dynamics in epoxy coatings containing iron oxide nanoparticles by dielectric relaxation spectroscopy
Reference: Journal of Applied Polymer Science (2008), 109(5), 3224-3229
Author: Martin, L.; Kortaberria, G.; Vazquez, A.; Fermeglia, M.; Martinelli, L.; Sinesi, S.; Jimeno, A.; de la Caba, K.; Mondragon, I.
Name: A comparative study of nanocomposites based on a recycled poly(methyl methacrylate) matrix containing several nanoclays
Reference: Polymer Composites (2008), 29(7), 782-790
Author: Gutierrez, J.; Tercjak, A.; Garcia, I.; Peponi, L.; Mondragon, I.
Name: Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol-gel synthesis
Reference: Nanotechnology (2008), 19(15), 155607/1-155607/8
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Morphological analysis of self-assembled SIS block copolymer matrices containing silver nanoparticles
Reference: Composites Science and Technology (2008), 68(7-8), 1631-1636
Author: Tercjak, A.; Gutierrez, J.; Garcia, I.; Mondragon, I.
Name: Meso/nanostructured composites based on self-assembled poly(styrene-b-ethylene oxide) block copolymer matrices
Reference: Leading-Edge Composite Material Research (2008), 9-21
Author: Stefani, P. M.; Pena, C.; Ruseckaite, R. A.; Piter, J. C.; Mondragon, I.
Name: Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
Reference: Bioresource Technology (2008), 99(13), 5977-5980
Author: Tejado, A.; Kortaberria, G.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of novolac-type lignophenolic resins cure
Reference: Thermochimica Acta (2008), 471(1-2), 80-85
Author: Eceiza, A.; Larranaga, M.; de la Caba, K.; Kortaberria, G.; Marieta, C.; Corcuera, M. A.; Mondragon, I.
Name: Structure-property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols
Reference: Journal of Applied Polymer Science (2008), 108(5), 3092-3103
Author: Peponi, Laura; Biagiotti, Jerico; Kenny, Jose M.; Mondragon, Inaki
Name: Statistical analysis of the mechanical properties of natural fibers and their composite materials. II. Composite materials
Reference: Polymer Composites (2008), 29(3), 321-325
Author: Peponi, Laura; Biagiotti, Jerico; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers
Reference: Polymer Composites (2008), 29(3), 313-320
Author: Tercjak, Agnieszka; Serrano, Elena; Larranaga, Maider; Mondragon, Inaki
Name: Polymer dispersed liquid crystals based on poly(styrene-b-ethylene oxide), poly(bisphenol a carbonate) or poly(methylphenylsiloxane), and 4-(hexyloxy)-4-biphenyl-carbonitrile: analysis of phase diagrams and morphologies generated
Reference: Journal of Applied Polymer Science (2008), 108(2), 1116-1125
Author: dArlas, Borja Fernandez; Rueda, Lorena; de la Caba, Koro; Mondragon, Inaki; Eceiza, Arantxa
Name: Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI
Reference: Polymer Engineering and Science (2008), 48(3), 519-529
Author: Perez, C. Javier; Alvarez, Vera A.; Mondragon, Inaki; Vazquez, Analia
Name: Water uptake behavior of layered silicate/starch-polycaprolactone blend nanocomposites
Reference: Polymer International (2008), 57(2) 247-253
Author: Eceiza, A.; Martin, M. D.; de la Caba, K.; Kortaberria, G.; Gabilondo, N.; Corcuera, M. A.; Mondragon, I.
Name: Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: mechanical and thermal properties
Reference: Polymer Engineering and Science (2008), 48(2), 297-306
Author: Ganan, Piedad; Zuluaga, Robin; Cruz, Javier; Velez, Juan M.; Retegi, Alona; Mondragon, Inaki
Name: Elucidation of the fibrous structure of Musaceae maturate rachis
Reference: Cellulose (Dordrecht, Netherlands) (2008), 15(1), 131-139
Author: Mujika, F.; Mondragon, I.; Berglund, L. A.; Varna, J.
Name: 45 Deg flexure test for measurement of in-plane shear modulus
Reference: Journal of Composite Materials (2002), 36(20), 2313-2337
Author: Lopez, M.; Blanco, M.; Vazquez, A.; Gabilondo, N.; Arbelaiz, A.; Echeverria, J. M.; Mondragon, I.
Name: Curing characteristics of resol-layered silicate nanocomposites
Reference: Thermochimica Acta (2008), 467(1-2), 73-79
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isocyanate curing of novolac-type ligno-phenol-formaldehyde resins
Reference: Industrial Crops and Products (2008), 27(2), 208-213
Author: Fernandez, Raquel; Mondragon, Inaki; Oyanguren, Patricia A.; Galante, Maria J.
Name: Synthesis and characterization of epoxy polymers containing azobenzene groups that exhibit optical birefringence
Reference: Reactive & Functional Polymers (2008), 68(1), 70-76
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Blanco, M.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Lignins for phenol replacement in novolac-type phenolic formulations. II. Flexural and compressive mechanical properties
Reference: Journal of Applied Polymer Science (2008), 107(1), 159-165
Author: Tercjak A; Garcia I; Mondragon I
Name: Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal
Reference: Nanotechnology (2008), 19(27), 275701
Author: Gutierrez J; Tercjak A; Garcia I; Peponi L; Mondragon I
Name: Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol-gel synthesis
Reference: Nanotechnology (2008), 19(15), 155607
Author: Tercjak Agnieszka; Mondragon Inaki
Name: Relationships between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting matrixes containing a 4-(hexyloxy)-4-biphenylcarbonitrile liquid crystal.
Reference: Langmuir. The ACS journal of surfaces and colloids (2008), 24(19), 11216-24
Author: Stefani P M; Pena C; Ruseckaite R A; Piter J C; Mondragon I
Name: Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
Reference: Bioresource technology (2008), 99(13), 5977-80
Author: Ganan Piedad; Zuluaga Robin; Restrepo Adriana; Labidi Jalel; Mondragon Inaki
Name: Plantain fibre bundles isolated from Colombian agro-industrial residues
Reference: Bioresource technology (2008), 99(3), 486-91
Author: Mujika F.
Name: On the effect of shear and local deformation in three-point bending tests
Reference: Polym Test 2007;26(7):869-77
Author: Alvarez, V.; Mondragon, I.; Vazquez, A.
Name: Influence of chemical treatments on the interfacial adhesion between sisal fibre and different biodegradable polymers
Reference: Composite Interfaces (2007), 14(7-9), 605-616
Author: Garcia, Ignacio; Tercjak, Agnieszka; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Self-assembling nanomaterials using magnetic nanoparticles modified with polystyrene brushes
Reference: Macromolecular Rapid Communications (2007), 28(24), 2361-2365
Author: Serrano, Elena; Tercjak, Agnieszka; Ocando, Connie; Larranaga, Maider; Parellada, M. Dolores; Corona-Galvan, Sergio; Mecerreyes, David; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Curing behavior and final properties of nanostructured thermosetting systems modified with epoxidized styrene-butadiene linear diblock copolymers
Reference: Macromolecular Chemistry and Physics (2007), 208(21), 2281-2292
Author: Lee, HyungKi; Pejanovic, Srdjan; Mondragon, Inaki; Mijovic, Jovan
Name: Dynamics of single-walled carbon nanotube (SWNT)/polyisoprene (PI) nanocomposites in electric and mechanical fields
Reference: Polymer (2007), 48(25), 7345-7355
Author: Ganan, Piedad; Zuluaga, Robin; Restrepo, Adriana; Labidi, Jalel; Mondragon, Inaki
Name: Plantain fiber bundles isolated from Colombian agro-industrial residues
Reference: Bioresource Technology (2007), Volume Date 2008, 99(3), 486-491
Author: Zuluaga, Robin; Putaux, Jean-Luc; Restrepo, Adriana; Mondragon, Inaki; Ganan, Piedad
Name: Cellulose microfibrils from banana farming residues: isolation and characterization
Reference: Cellulose (Dordrecht, Netherlands) (2007), 14(6), 585-592
Author: Larranaga, Maider; Serrano, Elena; Martin, Maria Dolores; Tercjak, Agnieszka; Kortaberria, Galder; de la Caba, Koro; Riccardi, Carmen Cristina; Mondragon, Inaki
Name: Mechanical properties-morphology relationships in nano-/microstructured epoxy matrices modified with PEO-PPO-PEO block copolymers
Reference: Polymer International (2007), 56(11), 1392-1403
Author: Tercjak, A.; Serrano, E.; Garcia, I.; Ocando, C.; Mondragon, I.
Name: Self-assembled block copolymers as matrix for multifunctional materials modified with low-molecular-weight liquid crystals
Reference: Acta Materialia (2007), 55(19), 6436-6443
Author: Garcia, I.; Tercjak, A.; Zafeiropoulos, N. E.; Stamm, M.; Mondragon, I.
Name: Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2007), 45(20), 4744-4750
Author: De Falco, Alejandro; Goyanes, Silvia; Rubiolo, Gerardo H.; Mondragon, Inaki; Marzocca, Angel
Name: Carbon nanotubes as reinforcement of styrene-butadiene rubber
Reference: Applied Surface Science (2007), 254(1), 262-265
Author: Ramos, Jose Angel; Serrano, Elena; Tercjak, Agniezska; Salgueiro, Walter; Goyanes, Silvia; Mondragon, Inaki
Name: PALS study of epoxy matrices: self-assembly of block copolymers and its capability for nanostructuring thermosetting systems
Reference: Physica Status Solidi C: Current Topics in Solid State Physics (2007), 4(10), 3690-3699
Author: Lopez, M.; Blanco, M.; Ramos, J. A.; Vazquez, A.; Gabilondo, N.; del Val, J. J.; Echeverria, J. M.; Mondragon, I.
Name: Synthesis and characterization of resol-layered silicate nanocomposites
Reference: Journal of Applied Polymer Science (2007), 106(4), 2800-2807
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, Inaki
Name: Lignins for phenol replacement in novolak-type phenolic formulations, part I: lignophenolic resins synthesis and characterization
Reference: Journal of Applied Polymer Science (2007), 106(4), 2313-2319
Author: Gabilondo, N.; Lopez, M.; Ramos, J. A.; Echeverria, J. M.; Mondragon, I.
Name: Curing kinetics of amine and sodium hydroxide catalyzed phenol-formaldehyde resins
Reference: Journal of Thermal Analysis and Calorimetry (2007), 90(1), 229-236
Author: Sangermano, Marco; Priola, Aldo; Kortaberria, Galder; Jimeno, Amaia; Garcia, Ignacio; Mondragon, Inaki; Rizza, Giancarlo
Name: Photopolymerization of epoxy coatings containing iron-oxide nanoparticles
Reference: Macromolecular Materials and Engineering (2007), 292(8), 956-961
Author: Kortaberria, G.; Jimeno, A.; Arruti, P.; Arbelaiz, A.; Mondragon, I.
Name: Molecular dynamics of poly(glycolide-co-L-lactide) copolymer during isothermal cold crystallization
Reference: Journal of Applied Polymer Science (2007), 106(1), 584-589
Author: Marcilla, Rebeca; Mecerreyes, David; Odriozola, Ibon; Pomposo, Jose A.; Rodriguez, Javier; Zalakain, Inaki; Mondragon, Inaki
Name: New amine functional ionic liquid as building block in nanotechnology
Reference: NANO (2007), 2(3), 169-173
Author: Genua, A.; Alduncin, J. A.; Pomposo, J. A.; Grande, H.; Kehagias, N.; Reboud, V.; Sotomayor, C.; Mondragon, I.; Mecerreyes, D.
Name: Functional patterns obtained by nanoimprinting lithography and subsequent growth of polymer brushes
Reference: Nanotechnology (2007), 18(21), 215301/1-215301/7
Author: Fernandez dArlas, B.; Rueda, L.; Stefani, P. M.; de la Caba, K.; Mondragon, I.; Eceiza, A.
Name: Kinetic and thermodynamic studies of the formation of a polyurethane based on 1,6-hexamethylene diisocyanate and poly(carbonate-co-ester)diol
Reference: Thermochimica Acta (2007), 459(1-2), 94-103
Author: Tercjak, Agnieszka; Serrano, Elena; Mondragon, Inaki
Name: Multifunctional thermally reversible nanostructured thermosetting materials based on block copolymers dispersed liquid crystal
Reference: Macromolecular Rapid Communications (2007), 28(8), 937-941
Author: Perez, C. Javier; Alvarez, Vera A.; Mondragon, Inaki; Vazquez, Analia
Name: Mechanical properties of layered silicate/starch polycaprolactone blend nanocomposites
Reference: Polymer International (2007), 56(5), 686-693
Author: Ocando, Connie; Serrano, Elena; Tercjak, Agnieszka; Pena, Cristina; Kortaberria, Galder; Calberg, Cedric; Grignard, Bruno; Jerome, Robert; Carrasco, Pedro M.; Mecerreyes, David; Mondragon, Inaki
Name: Structure and Properties of a Semifluorinated Diblock Copolymer Modified Epoxy Blend
Reference: Macromolecules (Washington, DC, United States) (2007), 40(11), 4068-4074
Author: Larranaga, Maider; Mondragon, Inaki; Riccardi, Carmen Cristina
Name: Miscibility and mechanical properties of an amine-cured epoxy resin blended with poly(ethylene oxide)
Reference: Polymer International (2007), 56(3), 426-433.
Author: Garcia, I.; Zafeiropoulos, N. E.; Janke, A.; Tercjak, A.; Eceiza, A.; Stamm, M.; Mondragon, I.
Name: Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting-from atom transfer radical polymerization
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2007), 45(5), 925-932
Author: Tejado, A.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Physico-chemical characterization of lignins from different sources for use in preparation of phenol-formaldehyde resin
Reference: Bioresource Technology (2007), 98(8), 1655-1663
Author: Goyanes, S.; Rubiolo, G. R.; Salazar, A.; Jimeno, A.; Corcuera, M. A.; Mondragon, I.
Name: Carboxylation treatment of multiwalled carbon nanotubes monitored by infrared and ultraviolet spectroscopies and scanning probe microscopy
Reference: Diamond and Related Materials (2007), 16(2), 412-417
Author: Tejado A; Pena C; Labidi J; Echeverria J M; Mondragon I.
Name: Physico-chemical characterization of lignins from different sources for use in phenol-formaldehyde resin synthesis
Reference: Bioresource technology (2007), 98(8), 1655-63
Author: Mujika F.
Name: On the difference between flexural moduli obtained by three-point and four-point bending tests
Reference: Polym Test 2006;25(2):214-20
Author: Mujika F, Carbajal N, Arrese A, Mondragon, I.
Name: Determination of tensile and compressive moduli by flexural tests
Reference: Polym Test 2006;25(6): 766-71
Author: Kortaberria, G.; Marieta, C.; Jimeno, A.; Arruti, P.; Mondragon, I.
Name: Crystallization of poly(L-lactic acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy
Reference: Journal of Microscopy (Oxford, United Kingdom) (2006), 224(3), 277-289
Author: Tercjak, A.; Serrano, E.; Mondragon, I.
Name: Thermally reversible materials based on thermosetting systems modified with polymer dispersed liquid crystals for optoelectronic application
Reference: Polymers for Advanced Technologies (2006), 17(11-12), 835-840
Author: Tercjak, A.; Larranaga, M.; Martin, M. D.; Mondragon, I.
Name: Thermally reversible nanostructured thermosetting blends modified with poly(ethylene-b-ethylene oxide) diblock copolymer
Reference: Journal of Thermal Analysis and Calorimetry (2006), 86(3), 663-667
Author: Somoza, A.; Salgueiro, W.; Goyanes, S.; Ramos, J.; Mondragon, I.
Name: Volume changes at macro- and nano-scale in epoxy resins studied by PALS and PVT experimental techniques
Reference: Radiation Physics and Chemistry (2006), Volume Date 2007, 76(2), 118-122
Author: Kortaberria, G.; Solar, L.; Jimeno, A.; Arruti, P.; Gomez, C.; Mondragon, I.
Name: Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements
Reference: Journal of Applied Polymer Science (2006), 102(6), 5927-5933
Author: Kortaberria, G.; Arruti, P.; Jimeno, A.; Serrano, E.; Mondragon, I.
Name: Molecular dynamics of poly(glycolide) and poly(glycolide-co-L-lactide) during isothermal cold crystallization
Reference: Journal of Non-Crystalline Solids (2006), 352(42-49), 5087-5092
Author: Retegi, A.; Arbelaiz, A.; Alvarez, P.; Llano-Ponte, R.; Labidi, J.; Mondragon, I.
Name: Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites
Reference: Journal of Applied Polymer Science (2006), 102(4), 3438-3445
Author: Gabilondo, N.; Larranaga, M.; Pena, C.; Corcuera, M. A.; Echeverria, J. M.; Mondragon, I.
Name: Polymerization of resole resins with several formaldehyde/phenol molar ratios: amine catalysts against sodium hydroxide catalysts
Reference: Journal of Applied Polymer Science (2006), 102(3), 2623-2631
Author: Costamagna, Vanina; Wunderlin, Daniel; Larranaga, Maider; Mondragon, Inaki; Strumia, Miriam
Name: Surface functionalization of polyolefin films via the ultraviolet-induced photografting of acrylic acid: topographical characterization and ability for binding antifungal agents
Reference: Journal of Applied Polymer Science (2006), 102(3), 2254-2263
Author: Tercjak, A.; Serrano, E.; Martin, M. D.; Marieta, C.; Mondragon, I.
Name: Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends
Reference: Journal of Applied Polymer Science (2006), 102(1), 479-488
Author: Mujika, F.; Carbajal, N.; Arrese, A.; Mondragon, I.
Name: Determination of tensile and compressive moduli by flexural tests
Reference: Polymer Testing (2006), 25(6), 766-771
Author: Larranaga, M.; Martin, M. D.; Gabilondo, N.; Kortaberria, G.; Eceiza, A.; Riccardi, C. C.; Mondragon, I.
Name: Toward microphase separation in epoxy systems containing PEO-PPO-PEO block copolymers by controlling cure conditions and molar ratios between blocks
Reference: Colloid and Polymer Science (2006), 284(12), 1403-1410
Author: Larranaga, M.; Arruti, P.; Serrano, E.; Caba, K.; Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Towards microphase separation in epoxy systemscontaining PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization
Reference: Colloid and Polymer Science (2006), 284(12), 1419-1430
Author: Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; de la Caba, Koro; Remiro, Pedro; Eceiza, Arantxa; Mondragon, Inaki
Name: Molecular dynamics of PGA bioabsorbable polymer during isothermal cold crystallization
Reference: Macromolecular Symposia (2006), 239(Advanced Polymers, Composites and Technologies), 152-158
Author: de la Caba, Koro; Larranaga, Maider; Eceiza, Arantxa; Corcuera, Maria Angeles; Mondragon, Inaki
Name: Kinetics and morphology of an epoxy resin modified with PEO-PPO-PEO block copolymers
Reference: Macromolecular Symposia (2006), 239(Advanced Polymers, Composites and Technologies), 30-35.
Author: Pena, C.; Martin, M. D.; Tejado, A.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Curing of phenolic resins modified with chestnut tannin extract
Reference: Journal of Applied Polymer Science (2006), 101(3), 2034-2039
Author: Salgueiro, W.; Ramos, J.; Somoza, A.; Goyanes, S.; Mondragon, I.
Name: Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study
Reference: Polymer (2006), 47(14), 5066-5070
Author: Mondragon, I.; Solar, L.; Nohales, A.; Vallo, C. I.; Gomez, C. M.
Name: Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites
Reference: Polymer (2006), 47(10), 3401-3409
Author: Pena, C.; Larranaga, M.; Gabilondo, N.; Tejado, A.; Echeverria, J. M.; Mondragon, I.
Name: Synthesis and characterization of phenolic novolaks modified by chestnut and mimosa tannin extracts
Reference: Journal of Applied Polymer Science (2006), 100(6), 4412-4419
Author: Rodriguez, Exequiel; Larranaga, Maider; Mondragon, Inaki; Vazquez, Analia.
Name: Relationship between the network morphology and properties of commercial vinyl ester resins
Reference: Journal of Applied Polymer Science (2006), 100(5), 3895-3903
Author: Arbelaiz, A.; Fernandez, B.; Valea, A.; Mondragon, I.
Name: Mechanical properties of short flax fibre bundle/poly(e-caprolactone) composites: influence of matrix modification and fibre content
Reference: Carbohydrate Polymers (2006),64(2), 224-232
Author: Tercjak, A.; Serrano, E.; Remiro, P. M.; Mondragon, I.
Name: Viscoelastic behavior of thermosetting epoxy mixtures modified with syndiotactic polystyrene during network formation
Reference: Journal of Applied Polymer Science (2006), 100(3), 2348-2355
Author: Serrano, Elena; Tercjak, Agnieszka; Kortaberria, Galder; Pomposo, Jose A.; Mecerreyes, David; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Nanostructured Thermosetting Systems by Modification with Epoxidized Styrene-Butadiene Star Block Copolymers. Effect of Epoxidation Degree
Reference: Macromolecules (2006), 39(6), 2254-2261
Author: Arbelaiz, A.; Fernandez, B.; Ramos, J. A.; Mondragon, I.
Name: Thermal and crystallization studies of short flax fiber reinforced polypropylene matrix composites: Effect of treatments
Reference: Thermochimica Acta (2006), 440(2), 111-121
Author: Antich, P.; Vazquez, A.; Mondragon, I.; Bernal, C.
Name: Mechanical behavior of high impact polystyrene reinforced with short sisal fibers
Reference: Composites, Part A: Applied Science and Manufacturing (2006), 37(1), 139-150.
Author: Kortaberria G; Marieta C; Jimeno A; Arruti P; Mondragon I
Name: Crystallization of poly(L-lactid acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy
Reference: Journal of microscopy (2006), 224(Pt 3), 277-89
Author: Serrano, E.; Larranaga, M.; Kortaberria, G.; Remiro, P. M.; Mondragon, I.; Mecerreyes, D.
Name: Towards nanostructured materials by modification of thermosetting matrices with block copolymers
Reference: New Developments in Polymer Analysis, Stabilization and Degradation (2005), 45-55
Author: De La Caba, Koro; Eceiza, Arantxa; Marieta, Cristina; Corcuera, Maria Angeles; Remiro, Pedro; Mondragon, Inaki
Name: Properties of a vinyl ester resin modified with a liquid polymer
Reference: High Performance Polymers (2005), 17(4), 605-616
Author: Arbelaiz, A.; Fernandez, B.; Cantero, G.; Llano-Ponte, R.; Valea, A.; Mondragon, I.
Name: Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization
Reference: Composites, Part A: Applied Science and Manufacturing (2005), 36A(12), 1637-1644
Author: Eceiza, A.; de la Caba, K.; Kortaberria, G.; Gabilondo, N.; Marieta, C.; Corcuera, M. A.; Mondragon, I.
Name: Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4-diphenylmethane diisocyanate
Reference: European Polymer Journal (2005), 41(12), 3051-3059
Author: Marieta, C.; Schulz, E.; Irusta, L.; Gabilondo, N.; Tercjak, A.; Mondragon, I.
Name: Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites
Reference: Composites Science and Technology (2005), 65(14), 2189-2197
Author: Gomez, Clara M.; Recalde, Ileana B.; Mondragon, Inaki
Name: Kinetic parameters of a cyanate ester resin catalyzed with different proportions of nonylphenol and cobalt acetylacetonate catalyst
Reference: European Polymer Journal (2005), 41(11), 2734-2741
Author: Blanco, Miren; Corcuera, M. Angeles; Riccardi, Carmen C.; Mondragon, Inaki
Name: Mechanistic kinetic model of an epoxy resin cured with a mixture of amines of different functionalities
Reference: Polymer (2005), 46(19), 7989-8000.
Author: Larranaga, M.; Gabilondo, N.; Kortaberria, G.; Serrano, E.; Remiro, P.; Riccardi, C. C.; Mondragon, I.
Name: Micro- or nano-separated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer
Reference: Polymer (2005), 46(18), 7082-7093
Author: Mujika, F.; Valea, A.; Ganan, P.; Mondragon, I.
Name: Off-axis flexure test: a new method for obtaining in-plane shear properties
Reference: Journal of Composite Materials (2005), 39(11), 953-980
Author: Arbelaiz, A.; Cantero, G.; Fernandez, B.; Mondragon, I.; Ganan, P.; Kenny, J.M.
Name: Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties
Reference: Polymer Composites (2005), 26(3), 324-332
Author: Serrano, Elena; Martin, M. Dolores; Tercjak, Agnieszka; Pomposo, Jose A.; Mecerreyes, David; Mondragon, Inaki
Name: Nanostructured thermosetting systems from epoxidized styrene butadiene block copolymers
Reference: Macromolecular Rapid Communications (2005), 26(12), 982-985
Author: Arbelaiz, A.; Fernandez, B.; Ramos, J. A.; Retegi, A.; Llano-Ponte, R.; Mondragon, I.
Name: Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling
Reference: Composites Science and Technology (2005), 65(10), 1582-1592
Author: Ganan, P.; Mondragon, I.
Name: Thermal and degradation behavior of fig fiber reinforced thermoplastic matrix composites
Reference: Journal of Thermal Analysis and Calorimetry (2003), 73(3), 783-795
Author: Giannotti, M. I.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Morphology profiles obtained by reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systems
Reference: Polymer International (2005), 54(6), 897-903
Author: Ganan, Piedad; Mondragon, Inaki
Name: Effect of fiber treatments on mechanical behavior of short fique fiber-reinforced polyacetal composites
Reference: Journal of Composite Materials (2005), 39(7), 633-646
Author: Ganan, Piedad; Garbizu, Saioa; Liano-Ponte, Rodrigo; Mondragon, Inaki
Name: Surface modification of sisal fibers: Effects on the mechanical and thermal properties of their epoxy composites
Reference: Polymer Composites (2005), 26(2), 121-127
Author: Ramos, J. A.; Pagani, N.; Riccardi, C. C.; Borrajo, J.; Goyanes, S. N.; Mondragon, I.
Name: Cure kinetics and shrinkage model for epoxy-amine systems
Reference: Polymer (2005), 46(10), 3323-3328
Author: Tercjak, A.; Remiro, P. M.; Mondragon, I.
Name: Phase separation and rheological behavior during curing of an epoxy resin modified with syndiotactic polystyrene
Reference: Polymer Engineering and Science (2005), 45(3), 303-313.
Author: Salmon, Nicolas; Carlier, Veronique; Schut, Jaap; Remiro, Pedro M.; Mondragon, Inaki
Name: Curing behaviour of syndiotactic polystyrene-epoxy blends: 1. Kinetics of curing and phase separation process
Reference: Polymer International (2005), 54(4), 667-672
Author: Jimeno, Amaya; Kortaberria, Galder; Larranaga, Maider; Gabilondo, Nagore; Mondragon, Inaki
Name: Morphological characterization and mechanical behavior of poly(styrene-co-acrylonitrile)-modified epoxy matrices
Reference: High Performance Polymers (2004), 16(4), 557-568
Author: Ganan, Piedad; Zuluaga, Robin; Velez, Juan Manuel; Mondragon, Inaki
Name: Biological natural retting for determining the hierarchical structuration of banana fibers
Reference: Macromolecular Bioscience (2004), 4(10), 978-983.
Author: Fernandez, B.; Arbelaiz, A.; Diaz, E.; Mondragon, I.
Name: Influence of polyethersulfone modification of a tetrafunctional epoxy matrix on the fracture behavior of composite laminates based on woven carbon fibers
Reference: Polymer Composites (2004), 25(5), 480-488
Author: Biagiotti, Jerico; Puglia, Debora; Torre, Luigi; Kenny, Jose M.; Arbelaiz, Aitor; Cantero, Guillermo; Marieta, Cristina; Llano-Ponte, Rodrigo; Mondragon, Inaki.
Name: A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites
Reference: Polymer Composites (2004), 25(5), 470-479
Author: Giannotti, M. I.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) Systems. II. Generated morphologies
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3964-3975
Author: Giannotti, M. I.; Foresti, M. L.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systems. I. Phase diagrams
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3953-3963
Author: Zubeldia, A.; Larranaga, M.; Remiro, P.; Mondragon, I.
Name: Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3920-3933
Author: Ganan, Piedad; Cruz, Javier; Garbizu, Saioa; Arbelaiz, Aitor; Mondragon, Inaki
Name: Stem and bunch banana fibers from cultivation wastes: Effect of treatments on physico-chemical behavior
Reference: Journal of Applied Polymer Science (2004), 94(4), 1489-1495
Author: Larranaga, M.; Martin, M. D.; Gabilondo, N.; Kortaberria, G.; Corcuera, M. A.; Riccardi, C. C.; Mondragon, I.
Name: Cure kinetics of epoxy systems modified with block copolymers
Reference: Polymer International (2004), 53(10), 1495-1502
Author: Ganan, Piedad; Mondragon, Inaki
Name: Influence of compatibilization treatments on the mechanical properties of fique fiber reinforced polypropylene composites
Reference: International Journal of Polymeric Materials (2004),53(11), 997-1013
Author: Goyanes, S.; Salgueiro, W.; Somoza, A.; Ramos, J. A.; Mondragon, I.
Name: Direct relationships between volume variations at macro and nanoscale in epoxy systems. PALS/PVT measurements
Reference: Polymer (2004), 45(19), 6691-6697
Author: Fernandez, B.; Arbelaiz, A.; Valea, A.; Mujika, F.; Mondragon, I.
Name: A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites
Reference: Polymer Composites (2004), 25(3), 19-330
Author: Mondragon, Inaki; Solar, Lorena; Recalde, Ileana B.; Gomez, Clara M.
Name: Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data
Reference: Thermochimica Acta (2004), 417(1), 19-26.
Author: Serrano, Elena; Larranaga, Maider; Remiro, Pedro M.; Mondragon, Inaki; Carrasco, Pedro M.; Pomposo, Jose A.; Mecerreyes, David
Name: Synthesis and characterization of epoxidized styrene-butadiene block copolymers as templates for nanostructured thermosets
Reference: Macromolecular Chemistry and Physics (2004), 205(7), 987-996
Author: Valea, A.; Mondragon, I.; Larrauri, S.; Gonzalez, M. L.
Name: Taguchi design applied to emulsion polymerization of styrene
Reference: Comunicaciones presentadas a las Jornadas del Comite Espanol de la Detergencia (2004), 34 175-186
Author: Ganan, P.; Mondragon, I.
Name: Fique fiber-reinforced polyester composites: Effects of fiber surface treatments on mechanical behavior
Reference: Journal of Materials Science (2004), 39(9), 3121-3128
Author: Ganan, Piedad; Zuluaga, R.; Rios, A.; Ramirez, M.; Mondragon, Inaki
Name: Influence of biological extraction time on banana fiber behavior
Reference: International Conference on Woodfiber-Plastic Composites, 7th, Madison, WI, United States, May 19-20, 2003 (2004), Meeting Date 2003, 319-321.
Author: Serrano, Elena; Zubeldia, Amaia; Larranaga, Maider; Remiro, Pedro; Mondragon, Inaki
Name: Effect of different thermal treatments on the self-assembled nanostructures of a styrene-butadiene-styrene star block copolymer
Reference: Polymer Degradation and Stability (2004), 83(3), 495-507
Author: Ganan Piedad; Zuluaga Robin; Velez Juan Manuel; Mondragon Inaki
Name: Biological natural retting for determining the hierarchical structuration of banana fibers
Reference: Macromolecular bioscience (2004), 4(10), 978-83
Author: Kortaberria, G.; Arruti, P.; Gabilondo, N.; Mondragon, I.
Name: Curing of an epoxy resin modified with poly(methyl methacrylate) monitored by simultaneous dielectric/near infrared spectroscopies
Reference: European Polymer Journal (2003), Volume Date 2004, 40(1), 129-136
Author: Fernandez, B.; Mujika, F.; De Benito, A.; Mondragon, I.
Name: Mechanical characterization of woven carbon fiber composites with poly(methyl methacrylate)-modified epoxy matrices
Reference: Polymer Composites (2003), 24(5), 640-654
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.
Name: In situ real-time monitoring of a diglycidyl ether of bisphenol A epoxy resin modified with poly(etherimide)/polysulphone blends by simultaneous dielectric/near-infrared spectroscopy
Reference: Macromolecular Symposia (2003), 198(7th European Symposium on Polymer Blends, 2002), 389-398
Author: Ganan, P.; Mondragon, I.
Name: Thermal and degradation behavior of fig fiber reinforced thermoplastic matrix composites
Reference: Journal of Thermal Analysis and Calorimetry (2003), 73(3), 783-795
Author: Pena, G.; Eceiza, A.; Valea, A.; Remiro, P.; Oyanguren, P.; Mondragon, I.
Name: Control of morphologies and mechanical properties of thermoplastic-modified epoxy matrices by addition of a second thermoplastic Polymer
Reference: International (2003), 52(9), 1444-1453)
Author: Marieta, C.; Remiro, P. M.; Garmendia, G.; Harismendy, I.; Mondragon, I.
Name: AFM approach toward understanding morphologies in toughened thermosetting matrices
Reference: European Polymer Journal (2003), 39(10), 1965-1973
Author: Mujika, F.; De Benito, A.; Mondragon, I.
Name: On the displacement field for unidirectional off-axis composites in 3-point flexure - Part II: Numerical and experimental results
Reference: Journal of Composite Materials (2003), 37(13), 1191-1217
Author: Cantero, Guillermo; Arbelaiz, Aitor; Llano-Ponte, Rodrigo; Mondragon, Inaki
Name: Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
Reference: Composites Science and Technology (2003), 63(9), 1247-1254
Author: Goyanes, S.; Rubiolo, G.; Marzocca, A.; Salgueiro, W.; Somoza, A.; Consolati, G.; Mondragon, I.
Name: Yield and internal stresses in aluminum filled epoxy resin. A compression test and positron annihilation analysis
Reference: Polymer (2003), 44(11), 3193-3199
Author: Cantero, Guillermo; Arbelaiz, Aitor; Mugika, Faustino; Valea, Angel; Mondragon, Inaki
Name: Mechanical behavior of wood/polypropylene composites: Effects of fiber treatments and ageing processes Journal of Reinforced
Reference: Plastics and Composites (2003), 22(1), 37-50
Author: Gabilondo, N.; Martin, M. D.; Mondragon, I.; Echeverria, J. M.
Name: Polymerization of formaldehyde and phenol at different pressures
Reference: High Performance Polymers (2002), 14(4), 415-423
Author: Ganan, Piedad; Mondragon, Inaki. Surface modification of fique fibers
Name: Effects on their physico-mechanical properties
Reference: Polymer Composites (2002), 23(3), 383-394
Author: Mujika, F.; De Benito, A.; Fernandez, B.; Vazquez, A.; Llano-Ponte, R.; Mondragon, I.
Name: Mechanical properties of carbon woven reinforced epoxy matrix composites. A study on the influence of matrix modification with polysulfone
Reference: Polymer Composites (2002), 23(3), 372-382
Author: Valea Perez, A.; Mondragon, I.; Gonzalez Arce, M. L.
Name: Surface characteristics and micelle properties of a perfluorinated surfactant in solution
Reference: Comunicaciones presentadas a la Jornadas del Comite Espanol de la Detergencia (2002), 32 287-297
Author: Valea Perez, A.; Jimenez, Y.; Mondragon, I.; Gonzalez Arce, M. L.
Name: Dynamic response of fluoroalkyl surfactants in the presence of a nonionic surfactant
Reference: Comunicaciones presentadas a la Jornadas del Comite Espanol de la Detergencia (2002), 32 277-286
Author: Sarrionandia, Mariasun; Mondragon, Inaki; Moschiar, Stella Maris; Reboredo, Maria Marta; Vazquez, Analia
Name: Heat transfer for pultrusion of a modified acrylic/glass reinforced composite
Reference: Polymer Composites (2002), 23(1), 21-27
Author: Astarloa Aierbe, G.; Echeverria, J. M.; Riccardi, C. C.; Mondragon, I.
Name: Influence of the temperature on the formation of a phenolic resol resin catalyzed with amine
Reference: Polymer (2002), 43(8), 2239-2243
Author: Marieta, C.; Schulz, E.; Mondragon, I.
Name: Characterization of interfacial behavior in carbon-fiber/cyanate composites
Reference: Composites Science and Technology (2002), 62(2), 299-309
Author: Harismendy, I.; Del Rio, M.; Valea, A.; Gavalda, J. N. A.; Mondragon, I.
Name: Effects of the cure cycle and thermoplastic content on the final properties of dicyanate ester/polysulfone semi-IPNS
Reference: Journal of Applied Polymer Science (2002), 83(8), 1799-1809))
Author: Riccardi, C. C.; Astarloa Aierbe, G.; Echeverria, J. M.; Mondragon, I.
Name: Modeling of phenolic resin polymerization
Reference: Polymer (2002), 43(5), 1631-1639
Author: Recalde, Ileana B.; Campos, Agustin; Gomez, Clara M.; Mondragon, Inaki; Harismendy, Isabel
Name: Isothermal curing of a dicyanate ester monomer up to the gel point as studied by size exclusion chromatography International
Reference: Journal of Polymer Analysis and Characterization (2001), 6(6), 481-492
Author: Schauer, E.; Berglund, L.; Pena, G.; Marieta, C.; Mondragon, I.
Name: Morphological variations in PMMA-modified epoxy mixtures by PEO addition
Reference: Polymer (2001), Volume Date 2002, 43(4), 1241-1248
Author: Stefani, P. M.; Riccardi, C. C.; Remiro, P. M.; Mondragon, I.
Name: Morphology profiles generated by temperature gradient in PMMA modified epoxy system
Reference: Polymer Engineering and Science (2001), 41(11), 2013-2021
Author: Recalde, Ileana B.; Campos, Agustin; Mondragon, Inaki; Gomez, Clara M.
Name: Miscibility and kinetic behavior of cyanate resin/polysulfone blends
Reference: Macromolecular Symposia (2001), 174 (Polymerization Processes and Polymer Materials I), 175-185
Author: Remiro, P. M.; Marieta, C.; Riccardi, C. C.; Mondragon, I.
Name: Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix
Reference: Polymer (2001), 42(25), 09909-09914
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.
Name: Dielectric monitoring of curing of liquid oligomer-modified epoxy matrices
Reference: Polymer International (2001), 50(9), 957-965
Author: Fernandez, B.; Corcuera, M. A.; Marieta, C.; Mondragon, I.
Name: Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics
Reference: European Polymer Journal (2001), 37(9), 1863-1869
Author: Eceiza, A.; de la Caba, K.; Gascon, V.; Corcuera, M. A.; Mondragon, I.
Name: The influence of molecular weight and chemical structure of soft segment in reaction kinetics with tolyl isocyanate
Reference: European Polymer Journal (2001), 37(8), 1685-1693
Author: Stefani, P. M.; Moschiar, S. M.; Aranguren, M. I.; Marieta, C.; Mondragon, I.
Name: Curing of epoxy-urethane copolymers in a heated mold: effect of the curing conditions on the phase-separation process
Reference: Journal of Applied Polymer Science (2001), 81(4), 889-900
Author: Harismendy, I.; Del Rio, M.; Marieta, C.; Gavalda, J.; Mondragon, I.
Name: Dicyanate ester-polyetherimide semi-interpenetrating polymer networks. II. Effects of morphology on the fracture toughness and mechanical properties
Reference: Journal of Applied Polymer Science (2001), 80(14), 2759-2767
Author: Ormaetxea, M.; Forcada, J.; Mugika, F.; Valea, A.; Martin, M. D.; Marieta, C.; Goyanes, S.; Mondragon, I.
Name: Ultimate properties of rubber and core-shell modified epoxy matrices with different chain flexibilities.
Reference: Journal of Materials Science (2001), 36(4), 845-852
Author: Tellez C A; Hollauer E; Pais da Silva M I; Mondragon; Haiduc I; Curtui M
Name: Density functional theory study of the fourier transform infrared and Raman spectra of dichloro-bis(2,4-pentanedionate)tin(IV)
Reference: Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy (2001), 57(6), 1149-61
Author: Goyanes, S. N.; Marconi, J. D.; Konig, P. G.; Martin, M. D.; Mondragon, I.
Name: Dynamical properties of epoxy composites filled with quartz powder
Reference: Journal of Alloys and Compounds (2000), 310(1-2), 374-377
Author: Harismendy, Isabel; Gomez, Clara M.; Del Rio, Marcos; Mondragon, Inaki
Name: Cure monitoring of catalyzed cyanate ester resins
Reference: Polymer International (2000), 49(7), 735-742
Author: Aierbe, G. Astarloa; Echeverria, J. M.; Martin, M. D.; Etxeberria, A. M.; Mondragon, I.
Name: Influence of the initial formaldehyde to phenol molar ratio (F/P) on the formation of a phenolic resol resin catalyzed with amine
Reference: Polymer (2000), 41(18), 6797-6802
Author: Mijovic, Jovan; Shen, Mingzhao; Sy, Jo Wing; Mondragon, Inaki
Name: Dynamics and Morphology in Nanostructured Thermoset Network/Block Copolymer Blends during Network Formation
Reference: Macromolecules (2000), 33(14), 5235-5244
Author: Sarrionandia, M.; Mondragon, I.; Moschiar, S. M.; Vazquez, A.
Name: Analysis of kinetic parameters of an urethane-acrylate resin for pultrusion process
Reference: Journal of Applied Polymer Science (2000), 77(2), 355-362
Author: Marieta, C.; del Rio, M.; Harismendy, I.; Mondragon, I.
Name: Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy
Reference: European Polymer Journal (2000), 36(7), 1445-1454
Author: Aizpurua, B.; Franco, M.; Corcuera, M. A.; Riccardi, C. C.; Mondragon, I.
Name: Chemorheology and ultimate behavior of epoxy-amine mixtures modified with a liquid oligomer
Reference: Journal of Applied Polymer Science (2000), 76(8), 1269-1279
Author: Harismendy, I.; Rio, M. Del; Eceiza, A.; Gavalda, J.; Gomez, C. M.; Mondragon, I.
Name: Morphology and thermal behavior of dicyanate ester-polyetherimide semi-IPNS cured at different conditions
Reference: Journal of Applied Polymer Science (2000), 76(7), 1037-1047
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Vazquez, A.; Mondragon, I.
Name: Influence of the amount of catalyst and initial pH on the phenolic resol resin formation
Reference: Polymer (2000), 41(9), 3311-3315
Author: Martinez, I.; Martin, M. D.; Eceiza, A.; Oyanguren, P.; Mondragon, I.
Name: Phase separation in polysulfone-modified epoxy mixtures. Relationships between curing conditions, morphology and ultimate behavior
Reference: Polymer (1999), Volume Date 2000, 41(3), 1027-1035
Author: Eceiza, A.; Zabala, J.; Egiburu, J. L.; Corcuera, M. A.; Mondragon, I.; Pascault, J. P.
Name: Reaction kinetics of tolyl isocyanate with polyhexamethylene-pentamethylene carbonate diol
Reference: European Polymer Journal (1999), 35(11), 1949-1958
Author: Oyanguren, P. A.; Aizpurua, B.; Galante, M. J.; Riccardi, C. C.; Cortazar, O. D.; Mondragon, I.
Name: Design of the ultimate behavior of tetrafunctional epoxies modified with polysulfone by controlling microstructure development
Reference: Journal of Polymer Science, Part B: Polymer Physics (1999), 37(19), 2711-2725
Author: Remiro, P. M.; Riccardi, C. C.; Corcuera, M. A.; Mondragon, I.
Name: Design of morphology in PMMA-modified epoxy resins by control of curing conditions I. Phase behavior
Reference: Journal of Applied Polymer Science (1999), 74(4), 772-780
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC. III: zinc acetate
Reference: Polymer (1999), 40(21),5873-5878
Author: De La Caba, K.; Guerrero, P.; Gavalda, J.; Mondragon, I.
Name: Fracture behavior-morphology relationships in an unsaturated polyester resin modified with a liquid oligomer
Reference: Journal of Polymer Science, Part B: Polymer Physics (1999), 37(14), 1677-1685
Author: Franco, M.; Mondragon, I.; Bucknall, C. B.
Name: Blends of epoxy resin with amine-terminated polyoxypropylene elastomer: morphology and properties
Reference: Journal of Applied Polymer Science (1999), 72(3), 427-434
Author: Valea, A.; Gonzalez, M. L.; Mondragon, I.
Name: Vinyl ester and unsaturated polyester resins in contact with different chemicals: dynamic mechanical behavior
Reference: Journal of Applied Polymer Science (1999), 71(1), 21-28
Author: Martin, M. D.; Ormaetxea, M.; Harismendy, I.; Remiro, P. M.; Mondragon, I.
Name: Cure chemo-rheology of mixtures based on epoxy resins and ester cyanates
Reference: European Polymer Journal (1998), Volume Date 1999, 35(1), 57-68.
Author: Valea, A.; Martinez, I.; Gonzalez, M. L.; Eceiza, A.; Mondragon, I.
Name: Influence of cure schedule and solvent exposure on the dynamic mechanical behavior of a vinyl ester resin containing glass fibers
Reference: Journal of Applied Polymer Science (1998), 70(13), 2595-2602
Author: Marieta, C.; Mondragon, I.
Name: Adhesion at the carbon fiber/matrix interface of composites
Reference: Revista de Plasticos Modernos (1998), 76(507), 300-307.
Author: Harismendy, I.; Miner, R.; Valea, A.; Llano-Ponte, R.; Andres, M. A.; Mondragon, I.
Name: Relationships between chemical structure and fracture behavior of several epoxy mixtures
Reference: Journal of Polymer Materials (1998), 15(2), 205-213
Author: Mondragon, I.; Remiro, P. M.; Martin, M. D.; Valea, A.; Franco, M.; Bellenguer, V.
Name: Viscoelastic behavior of epoxy resins modified with poly(methyl methacrylate)
Reference: Polymer International (1998), 47(2), 152-158
Author: Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Design of mechanical behavior in PMMA-modified epoxy resins by control of phase separation
Reference: Polymeric Materials Science and Engineering (1998), 79 160-161
Author: Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Design of mechanical behavior in PMMA-modified epoxy resins by control of phase separation
Reference: Book of Abstracts, 216th ACS National Meeting, Boston, August 23-27 (1998), PMSE-082
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Martin, M. D.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC. 2. barium hydroxide
Reference: Polymer (1998), 39(15), 3467-3472
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Egiburu, J. L.; Ormaetxea, M.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC
Reference: Polymer (1998), 39(14), 3147-3153
Author: Valea, A.; Gonzalez, M. L.; Mondragon, I.
Name: Evaluation of a catalytic system for curing of vinyl ester resins
Reference: Revista de Plasticos Modernos (1998), 75(501), 279-282
Author: Mujika, F.; De Benito, A.; Atxega, M.; Fernandez, B.; Jauregi, M.; Nieto, P.; Mondragon, I.
Name: Interlaminar fracture behavior of modified epoxy matrix composites
Reference: Revista de Plasticos Modernos (1998), 75(501), 247-249
Author: Andres, M. A.; Garmendia, J.; Valea, A.; Eceiza, A.; Mondragon, I.
Name: Fracture toughness of epoxy resins modified with polyethersulfone: influence of stoichiometry on the morphology of the mixtures
Reference: Journal of Applied Polymer Science (1998), 69(1), 183-191
Author: Oyanguren, P. A.; Riccardi, C. C.; Williams, R. J. J.; Mondragon, I.
Name: Phase separation induced by a chain polymerization: polysulfone-modified epoxy/anhydride systems
Reference: Journal of Polymer Science, Part B: Polymer Physics (1998), 36(8), 1349-1359
Author: Caba, Koro De La; Guerrero, Pedro; Mondragon, Inaki; Kenny, Jose M.
Name: Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures
Reference: Polymer International (1998), 45(4), 333-338
Author: Harismendy, I.; Gomez, C.; Ormaetxea, M.; Martin, M. D.; Eceiza, A.; Mondragon, I.
Name: Effects of the catalyst concentration on the cure behavior of a dicyanate ester prepolymer
Reference: Journal of Polymer Materials (1997), 14(4), 317-323
Author: Harismendy, I.; Miner, R.; Valea, A.; Llano-Ponte, R.; Mujika, F.; Mondragon, I.
Name: Strain rate and temperature effects on the mechanical behavior of epoxy mixtures with different crosslink densities
Reference: Polymer (1997), 38(22), 5573-5577
Author: De la Caba, Koro; Guerrero, Pedro; Franco, Merche; Mondragon, Inaki
Name: The effect of temperature on the curing of unsaturated polyester resins modified with a liquid polymer
Reference: Macromolecular Symposia (1997), 114(Polymer-Solvent Complexes), 271-277
Author: Corcuera, M. A.; Mondragon, I.; Riccardi, C. C.; Williams, R. J. J.
Name: Polymer networks derived from the anhydride curing of tetraepoxides
Reference: Journal of Applied Polymer Science (1997), 64(1), 157-166
Author: De La Caba, K.; Guerrero, P.; Eceiza, A.; Mondragon, I.
Name: Kinetic and rheological studies of two unsaturated polyester resins cured at different temperatures
Reference: European Polymer Journal (1997), 33(1), 19-23
Author: Franco, M.; Corcuera, M. A.; Gavalda, Jna.; Valea, A.; Mondragon, I.
Name: Influence of curing conditions on the morphology and physical properties of epoxy resins modified with a liquid polyamine
Reference: Journal of Polymer Science, Part B: Polymer Physics (1997), 35(2), 233-240
Author: Guerrero, P.; De la Caba, K.; Valea, A.; Corcuera, M. A.; Mondragon, I.
Name: Influence of cure schedule and stoichiometry on the dynamic mechanical behavior of tetrafunctional epoxy resins cured with anhydrides
Reference: Polymer (1996), 37(11), 2195-2200
Author: Fdez. de Nograro, F.; Llano-Ponte, R.; Mondragon, I.
Name: Dynamic and mechanical properties of epoxy networks obtained with PPO based amines/mPDA mixed curing agents
Reference: Polymer (1996), 37(9), 1589-1600
Author: Garmendia, J.; Alcorta, C.; Llano-Ponte, R.; Mondragon, I.
Name: Viscoelastic and mechanical properties of epoxy/mixed amine systems. Influence of stoichiometry and cure conditions
Reference: Polymers & Polymer Composites (1996), 4(1), 25-33
Author: de la Caba, K.; Guerrero, P.; Eceiza, A.; Mondragon, I.
Name: Kinetic and rheological studies of an unsaturated polyester cured with different catalyst amounts
Reference: Polymer (1996), 37(2), 275-80
Author: Fernandez-Nograro, F.; Valea, A.; Llano-Ponte, R.; Mondragon, I.
Name: Dynamic and mechanical properties of DGEBA/poly(propylene oxide) amine based epoxy resins as a function of stoichiometry
Reference: European Polymer Journal (1996), 32(2), 257-66
Author: Mijovic, Jovan; Andjelic, Sasa; Fitz, Benjamin; Zurawsky, Walter; Mondragon, Inaki; Bellucci, Francesco; Nicolais, Luigi
Name: Impedance spectroscopy of reactive polymers. 3. Correlations between dielectric, spectroscopic, and rheological properties during cure of a trifunctional epoxy resin
Reference: Journal of Polymer Science, Part B: Polymer Physics (1996), 34(2), 379-88
Author: Gonzalez, J.; Murillo, N.; Mondragon, I.; Blanco, J. M.; Echeberria, J.; Gonzalez, E.; Gonzalez, J. M.
Name: Influence of Cr addition on the magnetic softness of nanocrystalline FeCuNbSiB alloys
Reference: Scripta Metallurgica et Materialia (1995), 33(10/11), 1757-64
Author: Garmendia, J.; Olaizola, M.; Etxeberria, I.; Franco, J. C.; Mondragon, I.
Name: Influence of processing and testing conditions on the mechanical behavior of sheet-molding compound laminates
Reference: Journal of Materials Science (1995), 30(20), 5287-94
Author: Etxeberria, I.; Franco, J. C.; Valea, A.; Llano-Ponte, R.; Mondragon, I.
Name: Influence of solvent absorption on the mechanical behavior of SMC laminates
Reference: Journal of Reinforced Plastics and Composites (1995), 14(9), 988-1007
Author: Mondragon, I.; Quintard, I.; Bucknall, C. B.
Name: Effects of cure schedule and stoichiometry on the dynamic mechanical behavior of epoxy resin modified with polyethersulfone
Reference: Plastics, Rubber and Composites Processing and Applications (1995), 23(5), 331-8
Author: Meyer, Fred; Sanz, Genoveva; Eceiza, Arantxa; Mondragon, Inaki; Mijovic, Jovan
Name: The effect of stoichiometry and thermal history during cure on structure and properties of epoxy networks
Reference: Polymer (1995), 36(7), 1407-14
Author: De Nograro, F. F.; Guerrero, P.; Corcuera, M. A.; Mondragon, I.
Name: Effects of chemical structure of hardener on curing evolution and on the dynamic mechanical behavior of epoxy resins
Reference: Journal of Applied Polymer Science (1995), 56(2), 177-92
Author: Sanz, G.; Garmendia, J.; Andres, M. A.; Mondragon, I.
Name: Dependence of dynamic mechanical behavior of DGEBA/DDM stoichiometric epoxy systems on the conditions of curing process
Reference: Journal of Applied Polymer Science (1995), 55(1), 75-87
Author: Mondragon, I.; Bucknall, C. B.
Name: Effects of residual dichloromethane solvent on the cure of epoxy resin
Reference: Plastics, Rubber and Composites Processing and Applications (1994), 21(5), 275-81
Author: Imaz, J. J.; Valea, A.; Cortazar, M.; Mondragon, I.
Name: Correlations between rheological and thermal behavior of TGDDM/m-PDA epoxy systems
Reference: European Polymer Journal (1994), 30(5), 561-5
Author: Imaz, J. J.; Ezeiza, A.; Mondragon, I.
Name: Rheological parameters of tetraglycidyl-4,4-diaminodiphenylmethane/m-phenylenediamine system
Reference: Elhuyar (1992), 18(1-2), 131-7
Author: Beloki, J.; Ezeiza, A.; Mondragon, I.
Name: Modification of epoxy systems by polycarbonate of bisphenol A
Reference: Elhuyar (1992), 18(1-2), 125-30
Author: Corcuera, M. A.; Andres, M. A.; Sarasua, R.; Mondragon, I.
Name: Rheological and mechanical behavior of tetraglycidyldiaminodiphenylmethane (TGDDM)/anhydride epoxy systems
Reference: Polymer International (1992), 29(2), 97-102
Author: Imaz, J. J.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Physical and mechanical behavior of tetraglycidyldiaminodiphenyl methane (TGDDM)/m-phenylenediamine (m-PDA) epoxy systems
Reference: Journal of Applied Polymer Science (1992), 46(1), 147-66
Author: Imaz, J. J.; Markaide, N.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Rheological characterization of tetraglycidyl 4,4-diaminodiphenylmethane/m-phenylenediamine systems
Reference: European Polymer Journal (1992), 28(3), 299-303
Author: Corcuera, M. A.; Lozano, C.; Mondragon, I.
Name: Anhydrides as hardeners in curing of epoxy resins
Reference: Revista de Plasticos Modernos (1991), 62(422), 248-54
Author: Imaz, J. J.; Rodriguez, J. L.; Rubio, A.; Mondragon, I.
Name: Hydrothermal environment influence on water diffusion and mechanical behavior of carbon fiber-epoxy laminates
Reference: Journal of Materials Science Letters (1991), 10(11), 662-5
Author: Imaz, J. J.; Markaide, N.; Rubio, A.; Llano-Ponte, R.; Valea, A.; Mondragon, I.
Name: Physicorheological study of the tetraglycidyl-4,4-diaminodiphenylmethane/m-phenylenediamine system
Reference: Journ. Natl. Compos., 7th (1990), 763-73
Author: Beloki, J.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Addition of technical thermoplastic to epoxy resins for use in composites C.-R
Reference: Journ. Natl. Compos., 7th (1990), 111-21
Author: Valea Perez, A.; Gonzalez, M. L.; Mondragon, I.
Name: Influence of the thickening agents and some external parameters to the formulation on the viscosimetric kinetics of the preimpregnated polyester
Reference: Dev. Sci. Technol. Compos. Mater., Eur. Conf. Compos. Mater., 3rd (1989), 57-62
Author: Mondragon, I.; Imaz, J.; Rubio, A.; Valea, A.
Name: Moisture absorption influence on the mechanical properties of carbon/epoxy composites
Reference: Dev. Sci. Technol. Compos. Mater., Eur. Conf. Compos. Mater., 3rd (1989), 643-8
Name: Enhancement of Lignin Production from Olive Tree Pruning integrated in a Green Biorefinery
Reference: (2011) Industrial & Engineering Chemistry Research, 50(11), 6573-6579.
Author: Cristina Sánchez, Itziar Egüés, Rodrigo Llano-Ponte, Jalel Labidi
Name: Acid-and base-catalized hydrolysis of corn stalk
Reference: (2011) Biorecourses, 6(2) 1830-1842
Author: Araceli García, María González Alriols, Rodrigo Llano-Ponte, Jalel Labidi
Name: Ultrasound-assisted fractionation of the lignocellulosic material
Reference: (2011) Bioresource Technology, 102(10), 6326-6330
Author: Quijera JA, Alriols MG, Labidi, J.
Name: Integration of a solar thermal system in a dairy process
Reference: (2011) Renewable Energy, 36(6), 1843-1853.
Author: Serrano, L., Urruzola, I., Nemeth, D., Belafi-Bako, K., Labidi, J.
Name: Modified cellulose microfibrils as benzene adsorbent
Reference: (2011) Desalination, 270( 1-3), 143-150
Author: García, A., Alriols, M.G., Llano-Ponte, R., Labidi, J.
Name: Energy and economic assessment of soda and organosolv biorefinery processes
Reference: (2011) Biomass and Bioenergy, 35(1), 516-525.
Author: Mujika F, Pujana J, Olave M.
Name: On the determination of out-of-plane elastic properties of honeycomb sandwich panels
Reference: Polym Test 2011;30(2):222-28
Author: Vargas G, Mujika F.
Name: Determination of in-plane shear properties by three-point flexure test of +/- 45 degrees anti-symmetric laminates
Reference: Polym Test 2011;30(2):204-15
Author: Romera JM, Adarraga I, Cantera MA, Mujika F.
Name: Numerical analysis of displacement and stress fields of off-axis composites in three-point flexure
Reference: J Compos Mater 2011;45(6):671-82
Author: Corcuera, Ma. Angeles; Rueda, Lorena; Saralegui, Ainara; Martin, Ma. Dolores; Fernandez-dArlas, Borja; Mondragon, Inaki; Eceiza, Arantxa
Name: Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources
Reference: Journal of Applied Polymer Science (2011), 122(6), 3677-3685
Author: Garate, Hernan; Mondragon, Inaki; Goyanes, Silvia; DAccorso, Norma B.
Name: Controlled epoxidation of poly(styrene-b-isoprene-b-styrene) block copolymer for the development of nanostructured epoxy thermosets
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2011), 49(20), 4505-4513
Author: Lombardi, Mariangela; Guerriero, Andrea; Kortaberria, Galder; Mondragon, Inaki; Sangermano, Marco; Montanaro, Laura
Name: Effect of the ceramic filler features on the properties of photopolymerized BaTiO3-acrylic composites
Reference: Polymer Composites (2011), 32(8), 1304-1312
Author: Briones, Rodrigo; Serrano, Luis; Ben Younes, Rached; Mondragon, Inaki; Labidi, Jalel
Name: Polyol production by chemical modification of date seeds
Reference: Industrial Crops and Products (2011), 34(1), 1035-1040
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Martin, Loli; Mondragon, Inaki
Name: Electrical properties of TiO2/SEO nanocomposites: From macro to nano
Reference: Electrochimica Acta (2011), 56(16), 5582-5586
Author: Fernandez-dArlas, Borja; Khan, Umar; Rueda, Lorena; Coleman, Jonathan N.; Mondragon, Inaki; Corcuera, Maria A.; Eceiza, Arantxa
Name: Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites
Reference: Composites Science and Technology (2011), 71(8), 1030-1038
Author: Rueda, Lorena; Garcia, Inaki; Palomares, Teodoro; Alonso-Varona, Ana; Mondragon, Inaki; Corcuera, Marian; Eceiza, Arantxa
Name: The role of reactive silicates on the structure/property relationships and cell response evaluation in polyurethane nanocomposites
Reference: Journal of Biomedical Materials Research, Part A (2011), 97A(4), 480-489
Author: Fernandez, Raquel; Zalakain, Inaki; Ramos, Jose Angel; Martin, Loli; Mondragon, Inaki
Name: Morphological study and photo-addressing in poly(styrene-b-butadiene-b-styrene) block copolymers with azobenzene groups and polystyrene matrix: Influence of chemical bonding
Reference: European Polymer Journal (2011), 47(5), 1176-1185
Author: Gabilondo, Nagore; Martin, Loli; Retegi, Alona; Mondragon, Inaki; Berglund, Lars
Name: Property tailoring of phenol-formaldehyde matrices by control of reactant molar ratio and thermoplastic modification
Reference: Polymer International (2011), 60(5), 851-858
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.; Vescovo, L.; Sangermano, M.
Name: Dynamics of in situ synthetized silver-epoxy nanocomposites as studied by dielectric relaxation spectroscopy
Reference: Journal of Applied Polymer Science (2011), 120(4), 2361-2367
Author: Peponi, L.; Tercjak, A.; Martin, L.; Mondragon, I.; Kenny, J. M.
Name: Morphology-properties relationship on nanocomposite films based on poly(styrene-block-diene-block-styrene) copolymers and silver nanoparticles
Reference: eXPRESS Polymer Letters (2011), 5(2), 104-118
Author: Castro, Cristina; Zuluaga, Robin; Putaux, Jean-Luc; Caro, Gloria; Mondragon, Inaki; Ganan, Piedad
Name: Structural characterization of bacterial cellulose produced by Gluconacetobacter swingsii sp. from Colombian agroindustrial wastes
Reference: Carbohydrate Polymers (2011), 84(1), 96-102
Author: Zalakain, Inaki; Ramos, Jose Angel; Fernandez, Raquel; Etxeberria, Haritz; Mondragon, Inaki
Name: Nanostructuration of self-assembled poly(styrene-b-isoprene-b-styrene) block copolymer thin films in a highly oriented pyrolytic graphite substrate
Reference: Thin Solid Films (2011), 519(6), 1882-1885
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Mondragon, Inaki
Name: Conductive Properties of Photoluminescent Au/Ps-b-PEO Inorganic/Organic Hybrids Containing Nematic Liquid Crystals
Reference: Journal of Physical Chemistry C (2011), 115(5), 1643-1648
Author: Fernandez-dArlas, B.; Rueda, L.; Fernandez, R.; Khan, U.; Coleman, J. N.; Mondragon, I.; Eceiza, A.
Name: Inverting Polyurethanes Synthesis: Effects on Nano/Micro-Structure and Mechanical Properties
Reference: Soft Materials (2011), 9(1), 79-93
Author: García, A., Toledano, A., Andrés, M.A., Labidi, J.
Name: Study of the antioxidant capacity of Miscanthus sinensis lignins
Reference: (2010) Process Biochemistry, 45 (6), pp. 935-940.
Author: Egües, I., González Alriols, M., Herseczki, Z., Marton, G, Labidi, J.
Name: Hemicelluloses obtaining from rapeseed cake residue generated in the biodiesel production process
Reference: Journal of Industrial and Engineering Chemistry (2010), 16, 293–298.
Author: L. Serrano, I. Egues, M. Gonzalez Alriols, R. Llano-Ponte, J. Labidi
Name: Miscanthus sinensis fractionation by different reagents
Reference: Chemical Engineering Journal (2010), 156(1), 49-55
Author: M. Gonzalez Alriols, A. Garcia, R. Llano-ponte, J. Labidi
Name: Combined organosolv and ultrafiltration lignocellulosic biorefinery process
Reference: Chemical Engineering Journal (2010), 157(1), 113-120.
Author: Arrese A, Carbajal N, Vargas G, Mujika F.
Name: A new method for determining mode II R-curve by the End-Notched Flexure test
Reference: Eng Fract Mech 2010;77(1):51-70
Author: Vargas G, Mujika F.
Name: Determination of In-plane Shear Strength of Unidirectional Composite Materials Using the Off-axis Three-point Flexure and Off-axis Tensile Tests
Reference: J Compos Mater 2010;44(21):2487-507
Author: Tercjak, Agnieszka; Mondragon, Inaki
Name: Polymer dispersed liquid crystal, thermotropic and other responsive epoxy polymers
Reference: Epoxy Polymers (2010), 121-136
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Mondragon, Inaki
Name: Transparent Nanostructured Thermoset Composites Containing Well-Dispersed TiO2 Nanoparticles
Reference: Journal of Physical Chemistry C (2010), 114(51), 22424-22430
Author: Fernandez, Raquel; Zalakain, Inaki; Ramos, Jose Angel; Galante, Maria J.; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Fabrication of surface-relief gratings on an azobenzene-containing epoxy-based polymer film using atomic force microscopy
Reference: Polymer International (2010), 59(10), 1422-1427
Author: Remiro, Pedro M.; De La Caba, Koro; Mondragon, Inaki; Riccardi, Carmen C.
Name: Influence of phenoxy addition on the curing kinetics for uncatalyzed and catalyzed cyanate ester resin
Reference: Journal of Applied Polymer Science (2010), 118(5), 2869-2880
Author: Corcuera, M. A.; Rueda, L.; Fernandez dArlas, B.; Arbelaiz, A.; Marieta, C.; Mondragon, I.; Eceiza, A.
Name: Microstructure and properties of polyurethanes derived from castor oil
Reference: Polymer Degradation and Stability (2010), 95(11), 2175-2184
Author: Castro, Cristian; Gargallo, Ligia; Radic, Deodato; Kortaberria, Galder; Mondragon, Inaki
Name: Blends containing chitosan and poly(sodium-4-styrene sulphonate) Compatibility behavior
Reference: Carbohydrate Polymers (2011), 83(1), 81-87
Author: Vescovo, Lorenzo; Sangermano, Marco; Scarazzini, Riccardo; Kortaberria, Galder; Mondragon, Inaki
Name: In-situ-Synthesized Silver/Epoxy Nanocomposites: electrical Characterization by Means of Dielectric Spectroscopy
Reference: Macromolecular Chemistry and Physics (2010), 211(17), 1933-1939
Author: Felisberto, Marcos; Sacco, Leandro; Mondragon, Inaki; Rubiolo, Gerardo H.; Candal, Roberto J.; Goyanes, Silvia
Name: The growth of carbon nanotubes on large areas of silicon substrate using commercial iron oxide nanoparticles as a catalyst
Reference: Materials Letters (2010), 64(20), 2188-2190
Author: Diaz Costanzo, Guadalupe; Ledesma, Silvia; Mondragon, Inaki; Goyanes, Silvia
Name: Stable Solutions of Multiwalled Carbon Nanotubes Using an Azobenzene Dye
Reference: Journal of Physical Chemistry C (2010), 114(34), 14347-14352
Author: Sánchez, R., Ferrer, A., Serrano, L., Toledano, A., Labidi, J., Rodríguez, A.
Name: Hesperaloe funifera as a raw material for integral utilization of its components
Reference: (2011) BioResources, 6 (1), pp. 3-21.
Author: Castro, Cristian; Gargallo, Ligia; Radic, Deodato; Mondragon, Inaki; Kortaberria, Galder
Name: Blends of chitosan and poly(sodium-4-styrene sulphonate). Compatibilization by lysine and glutamic acid
Reference: Carbohydrate Polymers (2010), 82(3), 795-801
Author: Corcuera, Ma Angeles; Rueda, Lorena; Fernandez dArlas, Borja; Saralegui, Ainara; Marieta, Cristina; Arbelaiz, Aitor; Mondragon, Inaki; Eceiza, Arantxa
Name: Effect of Diisocyanate Structure on Thermal Properties and Microstructure of Polyurethanes Based on Polyols Derived from Renewable Resources
Reference: AIP Conference Proceedings (2010), 1255(Vth International Conference on Times of Polymers (TOP) and Composites, 2010), 290-293
Author: Araneda, E.; Gargallo, L.; Leiva, A.; Hadjichristidis, N.; Mondragon, I.; Radic, D.
Name: Blends of PEO in Poly(ethylene oxide)/Poly(2-vinyl pyridine)-b-poly(ethylene oxide)
Reference: AIP Conference Proceedings (2010), 1255(Vth International Conference on Times of Polymers (TOP) and Composites, 2010), 276-277
Author: Ocando, Connie; Tercjak, Agnieszka; Mondragon, Inaki
Name: Nanostructured systems based on SBS epoxidized triblock copolymers and well-dispersed alumina/epoxy matrix composites
Reference: Composites Science and Technology (2010), 70(7), 1106-1112
Author: Pena, Cristina; de la Caba, Koro; Eceiza, Arantxa; Ruseckaite, Roxana; Mondragon, Inaki
Name: Enhancing water repellence and mechanical properties of gelatin films by tannin addition
Reference: Bioresource Technology (2010), 101(17), 6836-6842
Author: Retegi, A.; Gabilondo, N.; Pena, C.; Zuluaga, R.; Castro, C.; Ganan, P.; La Caba, K.; Mondragon, I.
Name: Bacterial cellulose films with controlled microstructure-mechanical property relationships
Reference: Cellulose (Dordrecht, Netherlands) (2010), 17(3), 661-669
Author: Peponi, Laura; Tercjak, Agnieszka; Gutierrez, Junkal; Cardinali, Marta; Mondragon, Inaki; Valentini, Luca; Kenny, Jose M.
Name: Mapping of carbon nanotubes in the polystyrene domains of a polystyrene-b-polyisoprene-b-polystyrene block copolymer matrix using electrostatic force microscopy
Reference: Carbon (2010), 48(9), 2590-2595
Author: Retegi, Alona; Martin, Loli; Stefani, Pablo M.; Zuluaga Gallego, Robin; Ganan, Piedad; Mondragon, Inaki; Algar, Inaki
Name: Epoxidized soy bean oil/bacterial cellulose biocomposites
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Castro, Cristina I.; Zuluaga, Robin O.; Caro, Gloria; Putaux, Jean L.; Retegui, Alona; Mondragon, Inaki; Ganan, Piedad
Name: Production and characterization of bacterial cellulose from agroindustrial pineapple wastes
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Zuluaga Gallego, Robin O.; Castro Herazo, Cristina I.; Echeverry, Deicy L.; Velez, Lina M.; Hincapie Llanos, Gustavo A.; Mondragon, Inaki; Ganan Rojo, Piedad F.
Name: ATR-FTIR Analysis of changing cellulose crystalline structure in developing of pseudosteam of Musaceae plants
Reference: Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010
Author: Blanco, Miren; Lopez, Marta; Kortaberria, Galder; Mondragon, Inaki
Name: Nanostructured thermosets from self-assembled amphiphilic block copolymer/epoxy resin mixtures: effect of copolymer content on nanostructures
Reference: Polymer International (2010), 59(4), 523-528
Author: Toledano, A.; Garcia, A.; Mondragon, I.; Labidi, J.
Name: Lignin separation and fractionation by ultrafiltration
Reference: Separation and Purification Technology (2010), 71(1), 38-43
Author: Toledano, A.; Serrano, L.; Garcia, A.; Mondragon, I.; Labidi, J.
Name: Comparative study of lignin fractionation by ultrafiltration and selective precipitation
Reference: Chemical Engineering Journal (Amsterdam, Netherlands) (2010), 157(1)
Author: Serrano, Luis; Alriols, Maria Gonzalez; Briones, Rodrigo; Mondragon, Inaki; Labidi, Jalel
Name: Oxypropylation of Rapeseed Cake Residue Generated in the Biodiesel Production Process
Reference: Industrial & Engineering Chemistry Research (2010), 49(4), 1526-1529
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Mondragon, Inaki
Name: Conductive Behavior of High TiO2 Nanoparticle Content of Inorganic/Organic Nanostructured Composites
Reference: Journal of the American Chemical Society (2010), 132(2), 873-878
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Ocando, Connie; Mondragon, Inaki
Name: Conductive Properties of Switchable Photoluminescence Thermosetting Systems Based on Liquid Crystals
Reference: Langmuir (2010), 26(6), 4296-4302
Author: Pena Cristina; de la Caba Koro; Eceiza Arantxa; Ruseckaite Roxana; Mondragon Inaki
Name: Enhancing water repellence and mechanical properties of gelatin films by tannin addition
Reference: Bioresource technology (2010), 101(17), 6836-42
Author: Tercjak Agnieszka; Gutierrez Junkal; Ocando Connie; Mondragon Inaki
Name: Conductive properties of switchable photoluminescence thermosetting systems based on liquid crystals
Reference: Langmuir : The ACS journal of surfaces and colloids (2010), 26(6), 4296-302
Author: Gutierrez Junkal; Tercjak Agnieszka; Mondragon Inaki
Name: Conductive behavior of high TiO2 nanoparticle content of inorganic/organic nanostructured composites
Reference: Journal of the American Chemical Society (2010), 132(2), 873-8
Author: Araceli García, María González, Rodrigo Llano-Ponte, Jalel Labidi
Name: Energy Optimization of a Kraft Pulp Mill
Reference: Computer Aided Chemical Engineering (2009), 27, 417-422.
Author: Garcia, A. Toledano, L. Serrano, I. Egues, M. Gonzalez, F. Marin, J. Labidi
Name: Characterization of lignins obtained by selective precipitation
Reference: Separation and Purification Technology (2009), 68(2), 193-198.
Author: Carbajal N, Mujika F.
Name: Determination of compressive strength of unidirectional composites by three-point bending tests.
Reference: Polym Test 2009;28(2):150-6
Author: Carbajal N, Mujika F.
Name: Determination of longitudinal compressive strength of long fiber composites by three-point bending of [0(m)/90(n)/0(p)] cross-ply laminated strips
Reference: Polym Test 2009;28(6):618-26
Author: Vargas G, Arrese A, Carbajal N, Mujika F.
Name: Analysis of In-plane and Out-of-plane Thermo-mechanical Stresses in Un-symmetric Cross-ply Curved Laminated Strips
Reference: J Compos Mater 2009;43(25):3157-84
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Variation on the properties of silver nanoparticles nanocomposites based on SIS and SBS block copolymer
Reference: Special Topics on Materials Science and Technology: An Italian Panorama, [Selected Papers presented at the National Conference], 9th, Napoli, Italy, June 29-July 2, 2008 (2009), Meeting Date 2008, 295-302
Author: Tercjak, Agnieszka; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Blanco, Miren; Mondragon, Inaki
Name: Molecular dynamics of block copolymers by means of dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 163-186
Author: Blanco, Miren; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Mondragon, Inaki
Name: Nanocomposites based on polymer matrix and carbon nanotubes as studied by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 127-161
Author: Arruti, Puy; Kortaberria, Galder; Jimeno, Amaia; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Molecular dynamics in polymer/clay nanocomposites investigated by dielectric relaxation spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 97-125
Author: Mondragon, Inaki; Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren
Name: Molecular dynamics during crystallization of biodegradable polymers as monitored by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 69-96
Author: Jimeno, Amaia; Kortaberria, Galder; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Dynamics and dielectric properties of polymer/nanoparticle nanocomposites by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 31-67
Author: Blanco, M.; Lopez, M.; Fernandez, R.; Martin, L.; Riccardi, C. C.; Mondragon, I.
Name: Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Kinetics and miscibility study
Reference: Journal of Thermal Analysis and Calorimetry (2009), 97(3), 969-978
Author: Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; Tercjak, Agnieszka; Blanco, Miren; Mondragon, Inaki
Name: Dynamics of deoxyribonucleic acid as studied by dielectric spectroscopy
Reference: Biopolymers and Nanocomposites as Studied by Dielectric Spectroscopy (2009), 1-29
Author: Escobar, M.; Goyanes, S.; Corcuera, M. A.; Eceiza, A.; Mondragon, I.;Rubiolo, G. H.; Candal, R. J.
Name: Purification and functionalization of carbon nanotubes by classical and advanced oxidation processes
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6228-6233
Author: Jimeno,A.; Goyanes, S.; Eceiza, A.; Kortaberria, G.; Mondragon, I.; Corcuera, M. A.
Name: Effects of amine molecular structure on carbon nanotubes functionalization
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6222-6227
Author: Fernandez dArlas, B.; Goyanes, S.; Rubiolo, G. H.; Mondragon, I.; Corcuera, M. A.; Eceiza, A.
Name: Surface modification of multiwalled carbon nanotubes via esterification using a biodegradable polyol.
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(10), 6064-6071
Author: Peponi, Laura; Tercjak, Agnieszka; Verdejo, Raquel; Lopez-Manchado, Miguel Angel; Mondragon, Inaki; Kenny, Jose M.
Name: Confinement of functionalized graphene sheets by triblock copolymers
Reference: Journal of Physical Chemistry C (2009), 113(42), 17973-17978
Author: De Falco, Alejandro; Fascio, Mirta L.; Lamanna, Melisa E.; Corcuera, Maria A.; Mondragon, Inaki; Rubiolo, Gerardo H.; DAccorso, Norma B.; Goyanes, Silvia
Name: Thermal treatment of the carbon nanotubes and their functionalization with styrene
Reference: Physica B: Condensed Matter (Amsterdam, Netherlands) (2009), 404(18), 2780-2783
Author: Blanco, Miren; Lopez, Marta; Alvarez De Arcaya, Patricia; Ramos, Jose Angel; Kortaberria, Galder; Riccardi, Carmen Cristina; Mondragon, Inaki
Name: Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures: Morphology, thermal behavior, and mechanical properties
Reference: Journal of Applied Polymer Science (2009), 114(3), 1753-1760
Author: Tercjak, A.; Gutierrez, J.; Ocando, C. J.; Peponi, L.; Mondragon, I.
Name: Thermoresponsive inorganic/organic hybrids based on conductive TiO2 nanoparticles embedded in poly(styrene-b-ethylene oxide) block copolymer dispersed liquid crystals
Reference: Acta Materialia (2009), 57(15), 4624-4631
Author: Ocando, Connie; Tercjak, Agnieszka; Martin, M. Dolores; Ramos, Jose A.; Campo, Monica; Mondragon, Inaki
Name: Morphology Development in Thermosetting Mixtures through the Variation on Chemical Functionalization Degree of Poly(styrene-b-butadiene) Diblock Copolymer Modifiers. Thermomechanical Properties
Reference: Macromolecules (Washington, DC, United States) (2009), 42(16), 6215-6224
Author: Gutierrez, J.; Tercjak, A.; Garcia, I.; Mondragon, I.
Name: The effect of thermal and vapor annealing treatments on the self-assembly of TiO2/PS-b-PMMA nanocomposites generated via the sol-gel process
Reference: Nanotechnology (2009), 20(22), 225603/1-225603/9
Author: Fernandez, Raquel; dArlas, Borja Fernandez; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B.
Reference: Thermochimica Acta (2009), 493(1-2), 6-13
Author: Ramos, Jose Angel; Blanco, Miren; Zalakain, Inaki; Mondragon, Inaki
Name: Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics
Reference: Journal of Colloid and Interface Science (2009), 336(2), 431-437
Author: Peponi, Laura; Valentini, Luca; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Surfactant assisted selective confinement of carbon nanotubes functionalized with octadecylamine in a poly(styrene-b-isoprene-b-styrene) block copolymer matrix
Reference: Carbon (2009), 47(10), 2474-2480
Author: Rueda-Larraz, L.; dArlas, B. Fernandez; Tercjak, A.; Ribes, A.; Mondragon, I.; Eceiza, A
Name: Synthesis and microstructure-mechanical property relationships of segmented polyurethanes based on a PCL-PTHF-PCL block copolymer as soft segment
Reference: European Polymer Journal (2009), 45(7), 2096-2109
Author: De Falco, A.; Marzocca, A. J.; Corcuera, M. A.; Eceiza, A.; Mondragon, I.; Rubiolo, G. H.; Goyanes, S.
Name: Accelerator adsorption onto carbon nanotubes surface affects the vulcanization process of styrene-butadiene rubber composites
Reference: Journal of Applied Polymer Science (2009), 113(5), 2851-2857
Author: Blanco, M.; Ramos, J. A.; Goyanes, S.; Rubiolo, G.; Salgueiro, W.; Somoza, A.; Mondragon, I.
Name: Intermolecular interactions on amine-cured epoxy matrices with different crosslink densities. Influence on the hole and specific volumes and the mechanical behavior
Reference: Journal of Polymer Science, Part B: Polymer Physics (2009), 47(13), 1240-1252
Author: Pena, C.; Caba, K.; Retegi, A.; Ocando, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Mimosa and chestnut tannin extracts reacted with hexamine in solution
Reference: Journal of Thermal Analysis and Calorimetry (2009), 96(2), 515-521
Author: Lopez, M.; Blanco, M.; Vazquez, A.; Ramos, J. A.; Arbelaiz, A.; Gabilondo, N.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of resol-clay nanocomposites
Reference: Journal of Thermal Analysis and Calorimetry (2009), 96(2), 567-573
Author: Fernandez, R.; Mondragon, I.; Galante, M.; Oyanguren, P.
Name: Influence of chromophore concentration and network structure on the photo-orientation properties of crosslinked epoxy-based azopolymers
Reference: Journal of Polymer Science, Part B: Polymer Physics (2009), 47(10), 1004-1014
Author: Gutierrez, Junkal; Tercjak, Agnieszka; Peponi, Laura; Mondragon, Inaki
Name: Conductive Properties of Inorganic and Organic TiO2/Polystyrene-block-Poly(ethylene oxide) Nanocomposites
Reference: Journal of Physical Chemistry C (2009), 113(20), 8601-8605
Author: Fernandez, Raquel; Blanco, Miren; Galante, Maria J.; Oyanguren, Patricia A.; Mondragon, Inaki
Name: Polymerization of an epoxy resin modified with azobenzene groups monitored by near-infrared spectroscopy
Reference: Journal of Applied Polymer Science (2009), 112(5), 2999-3006
Author: Tercjak, Agnieszka; Gutierrez, Junkal; Peponi, Laura; Rueda, Lorena; Mondragon, Inaki
Name: Arrangement of Conductive TiO2 Nanoparticles in Hybrid Inorganic/Organic Thermosetting Materials Using Liquid Crystal
Reference: Macromolecules (Washington, DC, United States) (2009), 42(9), 3386-3390.
Author: Zuluaga, Robin; Mondragon, Inaki; Ganan, Piedad
Name: New approaches to cellulose microfibril isolation from Musaceae agro-industrial residues Composite
Reference: Interfaces (2009), 16(1), 27-37
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites
Reference: Journal of Nanoscience and Nanotechnology (2009), 9(3), 2128-2139
Author: Zuluaga, Robin; Putaux, Jean Luc; Castro, Cristina; Mondragon, Inaki; Ganan, Piedad
Name: Influence of mechanical treatment on the morphology of cellulose microfibrils isolated from banana rachis
Reference: Abstracts of Papers, 237th ACS National Meeting, Salt Lake City, UT, United States, March 22-26, 2009
Author: Serrano, E.; Kortaberria, G.; Arruti, P.; Tercjak, A.; Mondragon, I.
Name: Molecular dynamics of an epoxy resin modified with an epoxidized poly(styrene-butadiene) linear block copolymer during cure and microphase separation processes
Reference: European Polymer Journal (2009), 45(4), 1046-1057
Author: Alvarez de Arcaya, Patricia; Retegi, Alona; Arbelaiz, Aitor; Kenny, Jose Maria; Mondragon, Inaki
Name: Mechanical properties of natural fibers/polyamides composites
Reference: Polymer Composites (2009), 30(3), 257-264
Author: Alriols, M. Gonzalez; Tejado, A.; Blanco, M.; Mondragon, I.; Labidi, J.
Name: Agricultural palm oil tree residues as raw material for cellulose, lignin and hemicelluloses production by ethylene glycol pulping process
Reference: Chemical Engineering Journal (Amsterdam, Netherlands) (2009), 148(1), 106-114
Author: Fernandez, Raquel; Mondragon, Inaki; Galante, Maria J.; Oyanguren, Patricia A.
Name: Bonding and molecular environment effects on photoorientation in epoxy-based polymers having azobenzene units
Reference: European Polymer Journal (2009), 45(3), 788-794
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Mondragon, Inaki; Kenny, Jose M.
Name: Nanostructured physical gel of SBS block copolymer and Ag/DT/SBS nanocomposites
Reference: Journal of Materials Science (2009), 44(5), 1287-1293
Author: Zuluaga, Robin; Putaux, Jean Luc; Cruz, Javier; Velez, Juan; Mondragon, Inaki; Ganan, Piedad
Name: Cellulose microfibrils from banana rachis: Effect of alkaline treatments on structural and morphological features
Reference: Carbohydrate Polymers (2009), 76(1), 51-59
Author: Ramos, J. A.; Larranaga, M.; Mondragon, I.; Salgueiro, W.; Somoza, A.;Goyanes, S.; Rubiolo, G. H.
Name: Correlation between nanohole volume and mechanical properties of amine-cured epoxy resin blended with poly(ethylene oxide)
Reference: Polymers for Advanced Technologies (2009), 20(1), 35-38
Author: Escobar M; Goyanes S; Corcuera M A; Eceiza A; Mondragon I; Rubiolo G H; Candal R J
Name: Purification and functionalization of carbon nanotubes by classical and advanced oxidation processes
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6228-33
Author: Jimeno A; Goyanes S; Eceiza A; Kortaberria G; Mondragon I; Corcuera M A
Name: Effects of amine molecular structure on carbon nanotubes functionalization
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6222-7
Author: Fernandez dArlas B; Goyanes S; Rubiolo G H; Mondragon I; Corcuera M A; Eceiza A.
Name: Surface modification of multiwalled carbon nanotubes via esterification using a biodegradable polyol
Reference: Journal of nanoscience and nanotechnology (2009), 9(10), 6064-71
Author: Ramos Jose Angel; Blanco Miren; Zalakain Inaki; Mondragon Inaki
Name: Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics
Reference: Journal of colloid and interface science (2009), 336(2), 431-7
Author: Gutierrez J; Tercjak A; Garcia I; Mondragon I
Name: The effect of thermal and vapor annealing treatments on the self-assembly of TiO2/PS-b-PMMA nanocomposites generated via the sol-gel process
Reference: Nanotechnology (2009), 20(22), 225603
Author: Peponi Laura; Tercjak Agnieszka; Torre Luigi; Kenny Jose M; Mondragon Inaki
Name: Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites
Reference: Journal of nanoscience and nanotechnology (2009), 9(3), 2128-39
Author: A. Rodríguez, L. Serrano, A. Moral, L. Jiménez
Name: Pulping of rice straw with high-boiling point organosolv solvents
Reference: Biochemical Engineering Journal (2008), 42, 243-247.
Author: M. González, L. Canton, A. Rodriguez, J. Labidi
Name: Effect of organosolv and soda pulping process on the metals conten of non-woody pulps
Reference: Bioresource Technology (2008) 99(14) 6621-6625
Author: Jalel Labidi, Alvaro Tejado, Araceli García, Luis Jiménez
Name: Simulation of tagasaste pulping using soda-anthraquinone
Reference: Bioresource Technology, (2008), 99(15), 7270-7277
Author: Maria González, Álvaro Tejado, Cristina Peña, Jalel Labidi
Name: Organosolv pulping processes simulations
Reference: Industrial & Engineering Chemistry Research, (2008), 47(6), 1903-1909
Author: Alejandro Rodríguez, Ana Moral, Luis Serrano, Luis Jiménez, Jalel Labidi
Name: Rice straw pulp obtained by using various methods
Reference: Bioresource Technology (2008), 99(8), 2881-2886
Author: Tejado, A.; Kortaberria, G.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of novolac-type lignophenolic resins cure
Reference: Thermochimica Acta (2008), 471(1-2), 80-85
Author: A. Rodríguez, L. Serrano, A. Moral, A. Pérez and L. Jiménez
Name: Use of high-boiling point organic solvents for pulping oil palm empty fruit bunches
Reference: Bioresource Technology (2008), 99(6), 1743-1749
Author: Carbajal N, Vargas G, Arrese A, Mujika F.
Name: Analysis of thermal stresses in unsymmetric cross-ply composite strips
Reference: J Compos Mater 2008;42(12):1247-66
Author: Arrese A, Mujika F.
Name: Influence of bending rotations on three and four-point bend end notched flexure tests
Reference: Eng Fract Mech 2008;75(14):4234-46
Author: Ocando, Connie; Tercjak, Agnieszka; Serrano, Elena; Ramos, Jose A.; Corona-Galvan, Sergio; Parellada, M. Dolores; Fernandez-Berridi, M. Jose; Mondragon, Inaki
Name: Micro- and macrophase separation of thermosetting systems modified with epoxidized styrene-block-butadiene-block-styrene linear triblock copolymers and their influence on final mechanical properties
Reference: Polymer International (2008), 57(12), 1333-1342
Author: Freire, Carmen S. R.; Silvestre, Armando J. D.; Pascoal Neto, Carlos; Gandini, Alessandro; Martin, Loli; Mondragon, Inaki
Name: Composites based on acylated cellulose fibers and low-density polyethylene: Effect of the fiber content, degree of substitution and fatty acid chain length on final properties
Reference: Composites Science and Technology (2008), 68(15-16), 3358-3364
Author: Vazquez, A.; Lopez, M.; Serrano, E.; Valea, A.; Zafeiropoulos, N. E.; Mondragon, I.
Name: Structural and ordering behavior of lamellar polystyrene-block-polybutadiene-block-polystyrene triblock copolymer containing layered silicates
Reference: Journal of Applied Polymer Science (2008), 110(6), 3624-3637
Author: Olmos, D.; Baselga, J.; Mondragon, I.; Gonzalez-Benito, J.
Name: The effect of surface modification of silica microfillers in an epoxy matrix on the thermo-mechanical properties
Reference: Journal of Adhesion Science and Technology (2008), 22(13), 1443-1459
Author: Garcia, Ignacio; Tercjak, Agnieszka; Rueda, Lorena; Mondragon, Inaki
Name: Self-Assembled Nanomaterials Using Magnetic Nanoparticles Modified with Polystyrene Brushes and Poly(styrene-b-butadiene-b-styrene)
Reference: Macromolecules (Washington, DC, United States) (2008), 41(23),9295-9298
Author: Tercjak, Agnieszka; Serrano, Elena; Garcia, Inaki; Mondragon, Inaki
Name: Thermoresponsive meso/nanostructured thermosetting materials based on PS-b-PEO block copolymer-dispersed liquid crystal: Curing behavior and morphological variation
Reference: Acta Materialia (2008), 56(18), 5112-5122.
Author: Peponi, Laura; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Morphology and rheological behaviour of Ag-SBS nanocomposite gels
Reference: AIP Conference Proceedings (2008), 1042(IVth International Conference on Times of Polymers (TOP) and Composites, 2008), 272-275
Author: Tercjak, Agnieszka; Mondragon, Inaki
Name: Relationships between the Morphology and Thermoresponsive Behavior in Micro/Nanostructured Thermosetting Matrixes Containing a 4-(Hexyloxy)-4-biphenylcarbonitrile Liquid Crystal
Reference: Langmuir (2008), 24(19), 11216-11224
Author: Vazquez, A.; Lopez, M.; Kortaberria, G.; Martin, L.; Mondragon, I.
Name: Modification of montmorillonite with cationic surfactants. Thermal and chemical analysis including CEC determination
Reference: Applied Clay Science (2008), 41(1-2), 24-36
Author: Tercjak, A.; Garcia, I.; Mondragon, I.
Name: Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal
Reference: Nanotechnology (2008), 19(27), 275701/1-275701/5
Author: Garcia, I.; Tercjak, A.; Gutierrez, J.; Rueda, L.; Mondragon, I.
Name: Nanostructuration via Solvent Vapor Exposure of Poly(2-vinyl pyridine-b-methyl methacrylate) Nanocomposites Using Modified Magnetic Nanoparticles
Reference: Journal of Physical Chemistry C (2008), 112(37), 14343-14347
Author: Peponi, Laura; Tercjak, Agnieszka; Gutierrez, Junkal; Stadler, Hartmut; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Self-assembling of SBS block copolymers as templates for conductive silver nanocomposites
Reference: Macromolecular Materials and Engineering (2008), 293(7), 568-573
Author: Kortaberria, G.; Arruti, P.; Jimeno, A.; Mondragon, I.; Sangermano, M.
Name: Local dynamics in epoxy coatings containing iron oxide nanoparticles by dielectric relaxation spectroscopy
Reference: Journal of Applied Polymer Science (2008), 109(5), 3224-3229
Author: Martin, L.; Kortaberria, G.; Vazquez, A.; Fermeglia, M.; Martinelli, L.; Sinesi, S.; Jimeno, A.; de la Caba, K.; Mondragon, I.
Name: A comparative study of nanocomposites based on a recycled poly(methyl methacrylate) matrix containing several nanoclays
Reference: Polymer Composites (2008), 29(7), 782-790
Author: Gutierrez, J.; Tercjak, A.; Garcia, I.; Peponi, L.; Mondragon, I.
Name: Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol-gel synthesis
Reference: Nanotechnology (2008), 19(15), 155607/1-155607/8
Author: Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Morphological analysis of self-assembled SIS block copolymer matrices containing silver nanoparticles
Reference: Composites Science and Technology (2008), 68(7-8), 1631-1636
Author: Tercjak, A.; Gutierrez, J.; Garcia, I.; Mondragon, I.
Name: Meso/nanostructured composites based on self-assembled poly(styrene-b-ethylene oxide) block copolymer matrices
Reference: Leading-Edge Composite Material Research (2008), 9-21
Author: Stefani, P. M.; Pena, C.; Ruseckaite, R. A.; Piter, J. C.; Mondragon, I.
Name: Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
Reference: Bioresource Technology (2008), 99(13), 5977-5980
Author: Tejado, A.; Kortaberria, G.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isoconversional kinetic analysis of novolac-type lignophenolic resins cure
Reference: Thermochimica Acta (2008), 471(1-2), 80-85
Author: Eceiza, A.; Larranaga, M.; de la Caba, K.; Kortaberria, G.; Marieta, C.; Corcuera, M. A.; Mondragon, I.
Name: Structure-property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols
Reference: Journal of Applied Polymer Science (2008), 108(5), 3092-3103
Author: Peponi, Laura; Biagiotti, Jerico; Kenny, Jose M.; Mondragon, Inaki
Name: Statistical analysis of the mechanical properties of natural fibers and their composite materials. II. Composite materials
Reference: Polymer Composites (2008), 29(3), 321-325
Author: Peponi, Laura; Biagiotti, Jerico; Torre, Luigi; Kenny, Jose M.; Mondragon, Inaki
Name: Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers
Reference: Polymer Composites (2008), 29(3), 313-320
Author: Tercjak, Agnieszka; Serrano, Elena; Larranaga, Maider; Mondragon, Inaki
Name: Polymer dispersed liquid crystals based on poly(styrene-b-ethylene oxide), poly(bisphenol a carbonate) or poly(methylphenylsiloxane), and 4-(hexyloxy)-4-biphenyl-carbonitrile: analysis of phase diagrams and morphologies generated
Reference: Journal of Applied Polymer Science (2008), 108(2), 1116-1125
Author: dArlas, Borja Fernandez; Rueda, Lorena; de la Caba, Koro; Mondragon, Inaki; Eceiza, Arantxa
Name: Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI
Reference: Polymer Engineering and Science (2008), 48(3), 519-529
Author: Perez, C. Javier; Alvarez, Vera A.; Mondragon, Inaki; Vazquez, Analia
Name: Water uptake behavior of layered silicate/starch-polycaprolactone blend nanocomposites
Reference: Polymer International (2008), 57(2) 247-253
Author: Eceiza, A.; Martin, M. D.; de la Caba, K.; Kortaberria, G.; Gabilondo, N.; Corcuera, M. A.; Mondragon, I.
Name: Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: mechanical and thermal properties
Reference: Polymer Engineering and Science (2008), 48(2), 297-306
Author: Ganan, Piedad; Zuluaga, Robin; Cruz, Javier; Velez, Juan M.; Retegi, Alona; Mondragon, Inaki
Name: Elucidation of the fibrous structure of Musaceae maturate rachis
Reference: Cellulose (Dordrecht, Netherlands) (2008), 15(1), 131-139
Author: Mujika, F.; Mondragon, I.; Berglund, L. A.; Varna, J.
Name: 45 Deg flexure test for measurement of in-plane shear modulus
Reference: Journal of Composite Materials (2002), 36(20), 2313-2337
Author: Lopez, M.; Blanco, M.; Vazquez, A.; Gabilondo, N.; Arbelaiz, A.; Echeverria, J. M.; Mondragon, I.
Name: Curing characteristics of resol-layered silicate nanocomposites
Reference: Thermochimica Acta (2008), 467(1-2), 73-79
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Isocyanate curing of novolac-type ligno-phenol-formaldehyde resins
Reference: Industrial Crops and Products (2008), 27(2), 208-213
Author: Fernandez, Raquel; Mondragon, Inaki; Oyanguren, Patricia A.; Galante, Maria J.
Name: Synthesis and characterization of epoxy polymers containing azobenzene groups that exhibit optical birefringence
Reference: Reactive & Functional Polymers (2008), 68(1), 70-76
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Blanco, M.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Lignins for phenol replacement in novolac-type phenolic formulations. II. Flexural and compressive mechanical properties
Reference: Journal of Applied Polymer Science (2008), 107(1), 159-165
Author: Tercjak A; Garcia I; Mondragon I
Name: Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal
Reference: Nanotechnology (2008), 19(27), 275701
Author: Gutierrez J; Tercjak A; Garcia I; Peponi L; Mondragon I
Name: Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol-gel synthesis
Reference: Nanotechnology (2008), 19(15), 155607
Author: Tercjak Agnieszka; Mondragon Inaki
Name: Relationships between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting matrixes containing a 4-(hexyloxy)-4-biphenylcarbonitrile liquid crystal.
Reference: Langmuir. The ACS journal of surfaces and colloids (2008), 24(19), 11216-24
Author: Stefani P M; Pena C; Ruseckaite R A; Piter J C; Mondragon I
Name: Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
Reference: Bioresource technology (2008), 99(13), 5977-80
Author: Ganan Piedad; Zuluaga Robin; Restrepo Adriana; Labidi Jalel; Mondragon Inaki
Name: Plantain fibre bundles isolated from Colombian agro-industrial residues
Reference: Bioresource technology (2008), 99(3), 486-91
Author: Mujika F.
Name: On the effect of shear and local deformation in three-point bending tests
Reference: Polym Test 2007;26(7):869-77
Author: Alvarez, V.; Mondragon, I.; Vazquez, A.
Name: Influence of chemical treatments on the interfacial adhesion between sisal fibre and different biodegradable polymers
Reference: Composite Interfaces (2007), 14(7-9), 605-616
Author: Garcia, Ignacio; Tercjak, Agnieszka; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Self-assembling nanomaterials using magnetic nanoparticles modified with polystyrene brushes
Reference: Macromolecular Rapid Communications (2007), 28(24), 2361-2365
Author: Serrano, Elena; Tercjak, Agnieszka; Ocando, Connie; Larranaga, Maider; Parellada, M. Dolores; Corona-Galvan, Sergio; Mecerreyes, David; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Curing behavior and final properties of nanostructured thermosetting systems modified with epoxidized styrene-butadiene linear diblock copolymers
Reference: Macromolecular Chemistry and Physics (2007), 208(21), 2281-2292
Author: Lee, HyungKi; Pejanovic, Srdjan; Mondragon, Inaki; Mijovic, Jovan
Name: Dynamics of single-walled carbon nanotube (SWNT)/polyisoprene (PI) nanocomposites in electric and mechanical fields
Reference: Polymer (2007), 48(25), 7345-7355
Author: Ganan, Piedad; Zuluaga, Robin; Restrepo, Adriana; Labidi, Jalel; Mondragon, Inaki
Name: Plantain fiber bundles isolated from Colombian agro-industrial residues
Reference: Bioresource Technology (2007), Volume Date 2008, 99(3), 486-491
Author: Zuluaga, Robin; Putaux, Jean-Luc; Restrepo, Adriana; Mondragon, Inaki; Ganan, Piedad
Name: Cellulose microfibrils from banana farming residues: isolation and characterization
Reference: Cellulose (Dordrecht, Netherlands) (2007), 14(6), 585-592
Author: Larranaga, Maider; Serrano, Elena; Martin, Maria Dolores; Tercjak, Agnieszka; Kortaberria, Galder; de la Caba, Koro; Riccardi, Carmen Cristina; Mondragon, Inaki
Name: Mechanical properties-morphology relationships in nano-/microstructured epoxy matrices modified with PEO-PPO-PEO block copolymers
Reference: Polymer International (2007), 56(11), 1392-1403
Author: Tercjak, A.; Serrano, E.; Garcia, I.; Ocando, C.; Mondragon, I.
Name: Self-assembled block copolymers as matrix for multifunctional materials modified with low-molecular-weight liquid crystals
Reference: Acta Materialia (2007), 55(19), 6436-6443
Author: Garcia, I.; Tercjak, A.; Zafeiropoulos, N. E.; Stamm, M.; Mondragon, I.
Name: Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2007), 45(20), 4744-4750
Author: De Falco, Alejandro; Goyanes, Silvia; Rubiolo, Gerardo H.; Mondragon, Inaki; Marzocca, Angel
Name: Carbon nanotubes as reinforcement of styrene-butadiene rubber
Reference: Applied Surface Science (2007), 254(1), 262-265
Author: Ramos, Jose Angel; Serrano, Elena; Tercjak, Agniezska; Salgueiro, Walter; Goyanes, Silvia; Mondragon, Inaki
Name: PALS study of epoxy matrices: self-assembly of block copolymers and its capability for nanostructuring thermosetting systems
Reference: Physica Status Solidi C: Current Topics in Solid State Physics (2007), 4(10), 3690-3699
Author: Lopez, M.; Blanco, M.; Ramos, J. A.; Vazquez, A.; Gabilondo, N.; del Val, J. J.; Echeverria, J. M.; Mondragon, I.
Name: Synthesis and characterization of resol-layered silicate nanocomposites
Reference: Journal of Applied Polymer Science (2007), 106(4), 2800-2807
Author: Tejado, A.; Kortaberria, G.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, Inaki
Name: Lignins for phenol replacement in novolak-type phenolic formulations, part I: lignophenolic resins synthesis and characterization
Reference: Journal of Applied Polymer Science (2007), 106(4), 2313-2319
Author: Gabilondo, N.; Lopez, M.; Ramos, J. A.; Echeverria, J. M.; Mondragon, I.
Name: Curing kinetics of amine and sodium hydroxide catalyzed phenol-formaldehyde resins
Reference: Journal of Thermal Analysis and Calorimetry (2007), 90(1), 229-236
Author: Sangermano, Marco; Priola, Aldo; Kortaberria, Galder; Jimeno, Amaia; Garcia, Ignacio; Mondragon, Inaki; Rizza, Giancarlo
Name: Photopolymerization of epoxy coatings containing iron-oxide nanoparticles
Reference: Macromolecular Materials and Engineering (2007), 292(8), 956-961
Author: Kortaberria, G.; Jimeno, A.; Arruti, P.; Arbelaiz, A.; Mondragon, I.
Name: Molecular dynamics of poly(glycolide-co-L-lactide) copolymer during isothermal cold crystallization
Reference: Journal of Applied Polymer Science (2007), 106(1), 584-589
Author: Marcilla, Rebeca; Mecerreyes, David; Odriozola, Ibon; Pomposo, Jose A.; Rodriguez, Javier; Zalakain, Inaki; Mondragon, Inaki
Name: New amine functional ionic liquid as building block in nanotechnology
Reference: NANO (2007), 2(3), 169-173
Author: Genua, A.; Alduncin, J. A.; Pomposo, J. A.; Grande, H.; Kehagias, N.; Reboud, V.; Sotomayor, C.; Mondragon, I.; Mecerreyes, D.
Name: Functional patterns obtained by nanoimprinting lithography and subsequent growth of polymer brushes
Reference: Nanotechnology (2007), 18(21), 215301/1-215301/7
Author: Fernandez dArlas, B.; Rueda, L.; Stefani, P. M.; de la Caba, K.; Mondragon, I.; Eceiza, A.
Name: Kinetic and thermodynamic studies of the formation of a polyurethane based on 1,6-hexamethylene diisocyanate and poly(carbonate-co-ester)diol
Reference: Thermochimica Acta (2007), 459(1-2), 94-103
Author: Tercjak, Agnieszka; Serrano, Elena; Mondragon, Inaki
Name: Multifunctional thermally reversible nanostructured thermosetting materials based on block copolymers dispersed liquid crystal
Reference: Macromolecular Rapid Communications (2007), 28(8), 937-941
Author: Perez, C. Javier; Alvarez, Vera A.; Mondragon, Inaki; Vazquez, Analia
Name: Mechanical properties of layered silicate/starch polycaprolactone blend nanocomposites
Reference: Polymer International (2007), 56(5), 686-693
Author: Ocando, Connie; Serrano, Elena; Tercjak, Agnieszka; Pena, Cristina; Kortaberria, Galder; Calberg, Cedric; Grignard, Bruno; Jerome, Robert; Carrasco, Pedro M.; Mecerreyes, David; Mondragon, Inaki
Name: Structure and Properties of a Semifluorinated Diblock Copolymer Modified Epoxy Blend
Reference: Macromolecules (Washington, DC, United States) (2007), 40(11), 4068-4074
Author: Larranaga, Maider; Mondragon, Inaki; Riccardi, Carmen Cristina
Name: Miscibility and mechanical properties of an amine-cured epoxy resin blended with poly(ethylene oxide)
Reference: Polymer International (2007), 56(3), 426-433.
Author: Garcia, I.; Zafeiropoulos, N. E.; Janke, A.; Tercjak, A.; Eceiza, A.; Stamm, M.; Mondragon, I.
Name: Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting-from atom transfer radical polymerization
Reference: Journal of Polymer Science, Part A: Polymer Chemistry (2007), 45(5), 925-932
Author: Tejado, A.; Pena, C.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Physico-chemical characterization of lignins from different sources for use in preparation of phenol-formaldehyde resin
Reference: Bioresource Technology (2007), 98(8), 1655-1663
Author: Goyanes, S.; Rubiolo, G. R.; Salazar, A.; Jimeno, A.; Corcuera, M. A.; Mondragon, I.
Name: Carboxylation treatment of multiwalled carbon nanotubes monitored by infrared and ultraviolet spectroscopies and scanning probe microscopy
Reference: Diamond and Related Materials (2007), 16(2), 412-417
Author: Tejado A; Pena C; Labidi J; Echeverria J M; Mondragon I.
Name: Physico-chemical characterization of lignins from different sources for use in phenol-formaldehyde resin synthesis
Reference: Bioresource technology (2007), 98(8), 1655-63
Author: Mujika F.
Name: On the difference between flexural moduli obtained by three-point and four-point bending tests
Reference: Polym Test 2006;25(2):214-20
Author: Mujika F, Carbajal N, Arrese A, Mondragon, I.
Name: Determination of tensile and compressive moduli by flexural tests
Reference: Polym Test 2006;25(6): 766-71
Author: Kortaberria, G.; Marieta, C.; Jimeno, A.; Arruti, P.; Mondragon, I.
Name: Crystallization of poly(L-lactic acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy
Reference: Journal of Microscopy (Oxford, United Kingdom) (2006), 224(3), 277-289
Author: Tercjak, A.; Serrano, E.; Mondragon, I.
Name: Thermally reversible materials based on thermosetting systems modified with polymer dispersed liquid crystals for optoelectronic application
Reference: Polymers for Advanced Technologies (2006), 17(11-12), 835-840
Author: Tercjak, A.; Larranaga, M.; Martin, M. D.; Mondragon, I.
Name: Thermally reversible nanostructured thermosetting blends modified with poly(ethylene-b-ethylene oxide) diblock copolymer
Reference: Journal of Thermal Analysis and Calorimetry (2006), 86(3), 663-667
Author: Somoza, A.; Salgueiro, W.; Goyanes, S.; Ramos, J.; Mondragon, I.
Name: Volume changes at macro- and nano-scale in epoxy resins studied by PALS and PVT experimental techniques
Reference: Radiation Physics and Chemistry (2006), Volume Date 2007, 76(2), 118-122
Author: Kortaberria, G.; Solar, L.; Jimeno, A.; Arruti, P.; Gomez, C.; Mondragon, I.
Name: Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements
Reference: Journal of Applied Polymer Science (2006), 102(6), 5927-5933
Author: Kortaberria, G.; Arruti, P.; Jimeno, A.; Serrano, E.; Mondragon, I.
Name: Molecular dynamics of poly(glycolide) and poly(glycolide-co-L-lactide) during isothermal cold crystallization
Reference: Journal of Non-Crystalline Solids (2006), 352(42-49), 5087-5092
Author: Retegi, A.; Arbelaiz, A.; Alvarez, P.; Llano-Ponte, R.; Labidi, J.; Mondragon, I.
Name: Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites
Reference: Journal of Applied Polymer Science (2006), 102(4), 3438-3445
Author: Gabilondo, N.; Larranaga, M.; Pena, C.; Corcuera, M. A.; Echeverria, J. M.; Mondragon, I.
Name: Polymerization of resole resins with several formaldehyde/phenol molar ratios: amine catalysts against sodium hydroxide catalysts
Reference: Journal of Applied Polymer Science (2006), 102(3), 2623-2631
Author: Costamagna, Vanina; Wunderlin, Daniel; Larranaga, Maider; Mondragon, Inaki; Strumia, Miriam
Name: Surface functionalization of polyolefin films via the ultraviolet-induced photografting of acrylic acid: topographical characterization and ability for binding antifungal agents
Reference: Journal of Applied Polymer Science (2006), 102(3), 2254-2263
Author: Tercjak, A.; Serrano, E.; Martin, M. D.; Marieta, C.; Mondragon, I.
Name: Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends
Reference: Journal of Applied Polymer Science (2006), 102(1), 479-488
Author: Mujika, F.; Carbajal, N.; Arrese, A.; Mondragon, I.
Name: Determination of tensile and compressive moduli by flexural tests
Reference: Polymer Testing (2006), 25(6), 766-771
Author: Larranaga, M.; Martin, M. D.; Gabilondo, N.; Kortaberria, G.; Eceiza, A.; Riccardi, C. C.; Mondragon, I.
Name: Toward microphase separation in epoxy systems containing PEO-PPO-PEO block copolymers by controlling cure conditions and molar ratios between blocks
Reference: Colloid and Polymer Science (2006), 284(12), 1403-1410
Author: Larranaga, M.; Arruti, P.; Serrano, E.; Caba, K.; Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Towards microphase separation in epoxy systemscontaining PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization
Reference: Colloid and Polymer Science (2006), 284(12), 1419-1430
Author: Kortaberria, Galder; Jimeno, Amaia; Arruti, Puy; de la Caba, Koro; Remiro, Pedro; Eceiza, Arantxa; Mondragon, Inaki
Name: Molecular dynamics of PGA bioabsorbable polymer during isothermal cold crystallization
Reference: Macromolecular Symposia (2006), 239(Advanced Polymers, Composites and Technologies), 152-158
Author: de la Caba, Koro; Larranaga, Maider; Eceiza, Arantxa; Corcuera, Maria Angeles; Mondragon, Inaki
Name: Kinetics and morphology of an epoxy resin modified with PEO-PPO-PEO block copolymers
Reference: Macromolecular Symposia (2006), 239(Advanced Polymers, Composites and Technologies), 30-35.
Author: Pena, C.; Martin, M. D.; Tejado, A.; Labidi, J.; Echeverria, J. M.; Mondragon, I.
Name: Curing of phenolic resins modified with chestnut tannin extract
Reference: Journal of Applied Polymer Science (2006), 101(3), 2034-2039
Author: Salgueiro, W.; Ramos, J.; Somoza, A.; Goyanes, S.; Mondragon, I.
Name: Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study
Reference: Polymer (2006), 47(14), 5066-5070
Author: Mondragon, I.; Solar, L.; Nohales, A.; Vallo, C. I.; Gomez, C. M.
Name: Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites
Reference: Polymer (2006), 47(10), 3401-3409
Author: Pena, C.; Larranaga, M.; Gabilondo, N.; Tejado, A.; Echeverria, J. M.; Mondragon, I.
Name: Synthesis and characterization of phenolic novolaks modified by chestnut and mimosa tannin extracts
Reference: Journal of Applied Polymer Science (2006), 100(6), 4412-4419
Author: Rodriguez, Exequiel; Larranaga, Maider; Mondragon, Inaki; Vazquez, Analia.
Name: Relationship between the network morphology and properties of commercial vinyl ester resins
Reference: Journal of Applied Polymer Science (2006), 100(5), 3895-3903
Author: Arbelaiz, A.; Fernandez, B.; Valea, A.; Mondragon, I.
Name: Mechanical properties of short flax fibre bundle/poly(e-caprolactone) composites: influence of matrix modification and fibre content
Reference: Carbohydrate Polymers (2006),64(2), 224-232
Author: Tercjak, A.; Serrano, E.; Remiro, P. M.; Mondragon, I.
Name: Viscoelastic behavior of thermosetting epoxy mixtures modified with syndiotactic polystyrene during network formation
Reference: Journal of Applied Polymer Science (2006), 100(3), 2348-2355
Author: Serrano, Elena; Tercjak, Agnieszka; Kortaberria, Galder; Pomposo, Jose A.; Mecerreyes, David; Zafeiropoulos, Nikolaos E.; Stamm, Manfred; Mondragon, Inaki
Name: Nanostructured Thermosetting Systems by Modification with Epoxidized Styrene-Butadiene Star Block Copolymers. Effect of Epoxidation Degree
Reference: Macromolecules (2006), 39(6), 2254-2261
Author: Arbelaiz, A.; Fernandez, B.; Ramos, J. A.; Mondragon, I.
Name: Thermal and crystallization studies of short flax fiber reinforced polypropylene matrix composites: Effect of treatments
Reference: Thermochimica Acta (2006), 440(2), 111-121
Author: Antich, P.; Vazquez, A.; Mondragon, I.; Bernal, C.
Name: Mechanical behavior of high impact polystyrene reinforced with short sisal fibers
Reference: Composites, Part A: Applied Science and Manufacturing (2006), 37(1), 139-150.
Author: Kortaberria G; Marieta C; Jimeno A; Arruti P; Mondragon I
Name: Crystallization of poly(L-lactid acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy
Reference: Journal of microscopy (2006), 224(Pt 3), 277-89
Author: Serrano, E.; Larranaga, M.; Kortaberria, G.; Remiro, P. M.; Mondragon, I.; Mecerreyes, D.
Name: Towards nanostructured materials by modification of thermosetting matrices with block copolymers
Reference: New Developments in Polymer Analysis, Stabilization and Degradation (2005), 45-55
Author: De La Caba, Koro; Eceiza, Arantxa; Marieta, Cristina; Corcuera, Maria Angeles; Remiro, Pedro; Mondragon, Inaki
Name: Properties of a vinyl ester resin modified with a liquid polymer
Reference: High Performance Polymers (2005), 17(4), 605-616
Author: Arbelaiz, A.; Fernandez, B.; Cantero, G.; Llano-Ponte, R.; Valea, A.; Mondragon, I.
Name: Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization
Reference: Composites, Part A: Applied Science and Manufacturing (2005), 36A(12), 1637-1644
Author: Eceiza, A.; de la Caba, K.; Kortaberria, G.; Gabilondo, N.; Marieta, C.; Corcuera, M. A.; Mondragon, I.
Name: Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4-diphenylmethane diisocyanate
Reference: European Polymer Journal (2005), 41(12), 3051-3059
Author: Marieta, C.; Schulz, E.; Irusta, L.; Gabilondo, N.; Tercjak, A.; Mondragon, I.
Name: Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites
Reference: Composites Science and Technology (2005), 65(14), 2189-2197
Author: Gomez, Clara M.; Recalde, Ileana B.; Mondragon, Inaki
Name: Kinetic parameters of a cyanate ester resin catalyzed with different proportions of nonylphenol and cobalt acetylacetonate catalyst
Reference: European Polymer Journal (2005), 41(11), 2734-2741
Author: Blanco, Miren; Corcuera, M. Angeles; Riccardi, Carmen C.; Mondragon, Inaki
Name: Mechanistic kinetic model of an epoxy resin cured with a mixture of amines of different functionalities
Reference: Polymer (2005), 46(19), 7989-8000.
Author: Larranaga, M.; Gabilondo, N.; Kortaberria, G.; Serrano, E.; Remiro, P.; Riccardi, C. C.; Mondragon, I.
Name: Micro- or nano-separated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer
Reference: Polymer (2005), 46(18), 7082-7093
Author: Mujika, F.; Valea, A.; Ganan, P.; Mondragon, I.
Name: Off-axis flexure test: a new method for obtaining in-plane shear properties
Reference: Journal of Composite Materials (2005), 39(11), 953-980
Author: Arbelaiz, A.; Cantero, G.; Fernandez, B.; Mondragon, I.; Ganan, P.; Kenny, J.M.
Name: Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties
Reference: Polymer Composites (2005), 26(3), 324-332
Author: Serrano, Elena; Martin, M. Dolores; Tercjak, Agnieszka; Pomposo, Jose A.; Mecerreyes, David; Mondragon, Inaki
Name: Nanostructured thermosetting systems from epoxidized styrene butadiene block copolymers
Reference: Macromolecular Rapid Communications (2005), 26(12), 982-985
Author: Arbelaiz, A.; Fernandez, B.; Ramos, J. A.; Retegi, A.; Llano-Ponte, R.; Mondragon, I.
Name: Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling
Reference: Composites Science and Technology (2005), 65(10), 1582-1592
Author: Ganan, P.; Mondragon, I.
Name: Thermal and degradation behavior of fig fiber reinforced thermoplastic matrix composites
Reference: Journal of Thermal Analysis and Calorimetry (2003), 73(3), 783-795
Author: Giannotti, M. I.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Morphology profiles obtained by reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systems
Reference: Polymer International (2005), 54(6), 897-903
Author: Ganan, Piedad; Mondragon, Inaki
Name: Effect of fiber treatments on mechanical behavior of short fique fiber-reinforced polyacetal composites
Reference: Journal of Composite Materials (2005), 39(7), 633-646
Author: Ganan, Piedad; Garbizu, Saioa; Liano-Ponte, Rodrigo; Mondragon, Inaki
Name: Surface modification of sisal fibers: Effects on the mechanical and thermal properties of their epoxy composites
Reference: Polymer Composites (2005), 26(2), 121-127
Author: Ramos, J. A.; Pagani, N.; Riccardi, C. C.; Borrajo, J.; Goyanes, S. N.; Mondragon, I.
Name: Cure kinetics and shrinkage model for epoxy-amine systems
Reference: Polymer (2005), 46(10), 3323-3328
Author: Tercjak, A.; Remiro, P. M.; Mondragon, I.
Name: Phase separation and rheological behavior during curing of an epoxy resin modified with syndiotactic polystyrene
Reference: Polymer Engineering and Science (2005), 45(3), 303-313.
Author: Salmon, Nicolas; Carlier, Veronique; Schut, Jaap; Remiro, Pedro M.; Mondragon, Inaki
Name: Curing behaviour of syndiotactic polystyrene-epoxy blends: 1. Kinetics of curing and phase separation process
Reference: Polymer International (2005), 54(4), 667-672
Author: Jimeno, Amaya; Kortaberria, Galder; Larranaga, Maider; Gabilondo, Nagore; Mondragon, Inaki
Name: Morphological characterization and mechanical behavior of poly(styrene-co-acrylonitrile)-modified epoxy matrices
Reference: High Performance Polymers (2004), 16(4), 557-568
Author: Ganan, Piedad; Zuluaga, Robin; Velez, Juan Manuel; Mondragon, Inaki
Name: Biological natural retting for determining the hierarchical structuration of banana fibers
Reference: Macromolecular Bioscience (2004), 4(10), 978-983.
Author: Fernandez, B.; Arbelaiz, A.; Diaz, E.; Mondragon, I.
Name: Influence of polyethersulfone modification of a tetrafunctional epoxy matrix on the fracture behavior of composite laminates based on woven carbon fibers
Reference: Polymer Composites (2004), 25(5), 480-488
Author: Biagiotti, Jerico; Puglia, Debora; Torre, Luigi; Kenny, Jose M.; Arbelaiz, Aitor; Cantero, Guillermo; Marieta, Cristina; Llano-Ponte, Rodrigo; Mondragon, Inaki.
Name: A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites
Reference: Polymer Composites (2004), 25(5), 470-479
Author: Giannotti, M. I.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) Systems. II. Generated morphologies
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3964-3975
Author: Giannotti, M. I.; Foresti, M. L.; Mondragon, I.; Galante, M. J.; Oyanguren, P. A.
Name: Reaction-induced phase separation in epoxy/polysulfone/poly(ether imide) systems. I. Phase diagrams
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3953-3963
Author: Zubeldia, A.; Larranaga, M.; Remiro, P.; Mondragon, I.
Name: Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers
Reference: Journal of Polymer Science, Part B: Polymer Physics (2004), 42(21), 3920-3933
Author: Ganan, Piedad; Cruz, Javier; Garbizu, Saioa; Arbelaiz, Aitor; Mondragon, Inaki
Name: Stem and bunch banana fibers from cultivation wastes: Effect of treatments on physico-chemical behavior
Reference: Journal of Applied Polymer Science (2004), 94(4), 1489-1495
Author: Larranaga, M.; Martin, M. D.; Gabilondo, N.; Kortaberria, G.; Corcuera, M. A.; Riccardi, C. C.; Mondragon, I.
Name: Cure kinetics of epoxy systems modified with block copolymers
Reference: Polymer International (2004), 53(10), 1495-1502
Author: Ganan, Piedad; Mondragon, Inaki
Name: Influence of compatibilization treatments on the mechanical properties of fique fiber reinforced polypropylene composites
Reference: International Journal of Polymeric Materials (2004),53(11), 997-1013
Author: Goyanes, S.; Salgueiro, W.; Somoza, A.; Ramos, J. A.; Mondragon, I.
Name: Direct relationships between volume variations at macro and nanoscale in epoxy systems. PALS/PVT measurements
Reference: Polymer (2004), 45(19), 6691-6697
Author: Fernandez, B.; Arbelaiz, A.; Valea, A.; Mujika, F.; Mondragon, I.
Name: A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites
Reference: Polymer Composites (2004), 25(3), 19-330
Author: Mondragon, Inaki; Solar, Lorena; Recalde, Ileana B.; Gomez, Clara M.
Name: Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data
Reference: Thermochimica Acta (2004), 417(1), 19-26.
Author: Serrano, Elena; Larranaga, Maider; Remiro, Pedro M.; Mondragon, Inaki; Carrasco, Pedro M.; Pomposo, Jose A.; Mecerreyes, David
Name: Synthesis and characterization of epoxidized styrene-butadiene block copolymers as templates for nanostructured thermosets
Reference: Macromolecular Chemistry and Physics (2004), 205(7), 987-996
Author: Valea, A.; Mondragon, I.; Larrauri, S.; Gonzalez, M. L.
Name: Taguchi design applied to emulsion polymerization of styrene
Reference: Comunicaciones presentadas a las Jornadas del Comite Espanol de la Detergencia (2004), 34 175-186
Author: Ganan, P.; Mondragon, I.
Name: Fique fiber-reinforced polyester composites: Effects of fiber surface treatments on mechanical behavior
Reference: Journal of Materials Science (2004), 39(9), 3121-3128
Author: Ganan, Piedad; Zuluaga, R.; Rios, A.; Ramirez, M.; Mondragon, Inaki
Name: Influence of biological extraction time on banana fiber behavior
Reference: International Conference on Woodfiber-Plastic Composites, 7th, Madison, WI, United States, May 19-20, 2003 (2004), Meeting Date 2003, 319-321.
Author: Serrano, Elena; Zubeldia, Amaia; Larranaga, Maider; Remiro, Pedro; Mondragon, Inaki
Name: Effect of different thermal treatments on the self-assembled nanostructures of a styrene-butadiene-styrene star block copolymer
Reference: Polymer Degradation and Stability (2004), 83(3), 495-507
Author: Ganan Piedad; Zuluaga Robin; Velez Juan Manuel; Mondragon Inaki
Name: Biological natural retting for determining the hierarchical structuration of banana fibers
Reference: Macromolecular bioscience (2004), 4(10), 978-83
Author: Kortaberria, G.; Arruti, P.; Gabilondo, N.; Mondragon, I.
Name: Curing of an epoxy resin modified with poly(methyl methacrylate) monitored by simultaneous dielectric/near infrared spectroscopies
Reference: European Polymer Journal (2003), Volume Date 2004, 40(1), 129-136
Author: Fernandez, B.; Mujika, F.; De Benito, A.; Mondragon, I.
Name: Mechanical characterization of woven carbon fiber composites with poly(methyl methacrylate)-modified epoxy matrices
Reference: Polymer Composites (2003), 24(5), 640-654
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.
Name: In situ real-time monitoring of a diglycidyl ether of bisphenol A epoxy resin modified with poly(etherimide)/polysulphone blends by simultaneous dielectric/near-infrared spectroscopy
Reference: Macromolecular Symposia (2003), 198(7th European Symposium on Polymer Blends, 2002), 389-398
Author: Ganan, P.; Mondragon, I.
Name: Thermal and degradation behavior of fig fiber reinforced thermoplastic matrix composites
Reference: Journal of Thermal Analysis and Calorimetry (2003), 73(3), 783-795
Author: Pena, G.; Eceiza, A.; Valea, A.; Remiro, P.; Oyanguren, P.; Mondragon, I.
Name: Control of morphologies and mechanical properties of thermoplastic-modified epoxy matrices by addition of a second thermoplastic Polymer
Reference: International (2003), 52(9), 1444-1453)
Author: Marieta, C.; Remiro, P. M.; Garmendia, G.; Harismendy, I.; Mondragon, I.
Name: AFM approach toward understanding morphologies in toughened thermosetting matrices
Reference: European Polymer Journal (2003), 39(10), 1965-1973
Author: Mujika, F.; De Benito, A.; Mondragon, I.
Name: On the displacement field for unidirectional off-axis composites in 3-point flexure - Part II: Numerical and experimental results
Reference: Journal of Composite Materials (2003), 37(13), 1191-1217
Author: Cantero, Guillermo; Arbelaiz, Aitor; Llano-Ponte, Rodrigo; Mondragon, Inaki
Name: Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
Reference: Composites Science and Technology (2003), 63(9), 1247-1254
Author: Goyanes, S.; Rubiolo, G.; Marzocca, A.; Salgueiro, W.; Somoza, A.; Consolati, G.; Mondragon, I.
Name: Yield and internal stresses in aluminum filled epoxy resin. A compression test and positron annihilation analysis
Reference: Polymer (2003), 44(11), 3193-3199
Author: Cantero, Guillermo; Arbelaiz, Aitor; Mugika, Faustino; Valea, Angel; Mondragon, Inaki
Name: Mechanical behavior of wood/polypropylene composites: Effects of fiber treatments and ageing processes Journal of Reinforced
Reference: Plastics and Composites (2003), 22(1), 37-50
Author: Gabilondo, N.; Martin, M. D.; Mondragon, I.; Echeverria, J. M.
Name: Polymerization of formaldehyde and phenol at different pressures
Reference: High Performance Polymers (2002), 14(4), 415-423
Author: Ganan, Piedad; Mondragon, Inaki. Surface modification of fique fibers
Name: Effects on their physico-mechanical properties
Reference: Polymer Composites (2002), 23(3), 383-394
Author: Mujika, F.; De Benito, A.; Fernandez, B.; Vazquez, A.; Llano-Ponte, R.; Mondragon, I.
Name: Mechanical properties of carbon woven reinforced epoxy matrix composites. A study on the influence of matrix modification with polysulfone
Reference: Polymer Composites (2002), 23(3), 372-382
Author: Valea Perez, A.; Mondragon, I.; Gonzalez Arce, M. L.
Name: Surface characteristics and micelle properties of a perfluorinated surfactant in solution
Reference: Comunicaciones presentadas a la Jornadas del Comite Espanol de la Detergencia (2002), 32 287-297
Author: Valea Perez, A.; Jimenez, Y.; Mondragon, I.; Gonzalez Arce, M. L.
Name: Dynamic response of fluoroalkyl surfactants in the presence of a nonionic surfactant
Reference: Comunicaciones presentadas a la Jornadas del Comite Espanol de la Detergencia (2002), 32 277-286
Author: Sarrionandia, Mariasun; Mondragon, Inaki; Moschiar, Stella Maris; Reboredo, Maria Marta; Vazquez, Analia
Name: Heat transfer for pultrusion of a modified acrylic/glass reinforced composite
Reference: Polymer Composites (2002), 23(1), 21-27
Author: Astarloa Aierbe, G.; Echeverria, J. M.; Riccardi, C. C.; Mondragon, I.
Name: Influence of the temperature on the formation of a phenolic resol resin catalyzed with amine
Reference: Polymer (2002), 43(8), 2239-2243
Author: Marieta, C.; Schulz, E.; Mondragon, I.
Name: Characterization of interfacial behavior in carbon-fiber/cyanate composites
Reference: Composites Science and Technology (2002), 62(2), 299-309
Author: Harismendy, I.; Del Rio, M.; Valea, A.; Gavalda, J. N. A.; Mondragon, I.
Name: Effects of the cure cycle and thermoplastic content on the final properties of dicyanate ester/polysulfone semi-IPNS
Reference: Journal of Applied Polymer Science (2002), 83(8), 1799-1809))
Author: Riccardi, C. C.; Astarloa Aierbe, G.; Echeverria, J. M.; Mondragon, I.
Name: Modeling of phenolic resin polymerization
Reference: Polymer (2002), 43(5), 1631-1639
Author: Recalde, Ileana B.; Campos, Agustin; Gomez, Clara M.; Mondragon, Inaki; Harismendy, Isabel
Name: Isothermal curing of a dicyanate ester monomer up to the gel point as studied by size exclusion chromatography International
Reference: Journal of Polymer Analysis and Characterization (2001), 6(6), 481-492
Author: Schauer, E.; Berglund, L.; Pena, G.; Marieta, C.; Mondragon, I.
Name: Morphological variations in PMMA-modified epoxy mixtures by PEO addition
Reference: Polymer (2001), Volume Date 2002, 43(4), 1241-1248
Author: Stefani, P. M.; Riccardi, C. C.; Remiro, P. M.; Mondragon, I.
Name: Morphology profiles generated by temperature gradient in PMMA modified epoxy system
Reference: Polymer Engineering and Science (2001), 41(11), 2013-2021
Author: Recalde, Ileana B.; Campos, Agustin; Mondragon, Inaki; Gomez, Clara M.
Name: Miscibility and kinetic behavior of cyanate resin/polysulfone blends
Reference: Macromolecular Symposia (2001), 174 (Polymerization Processes and Polymer Materials I), 175-185
Author: Remiro, P. M.; Marieta, C.; Riccardi, C. C.; Mondragon, I.
Name: Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix
Reference: Polymer (2001), 42(25), 09909-09914
Author: Kortaberria, G.; Arruti, P.; Mondragon, I.
Name: Dielectric monitoring of curing of liquid oligomer-modified epoxy matrices
Reference: Polymer International (2001), 50(9), 957-965
Author: Fernandez, B.; Corcuera, M. A.; Marieta, C.; Mondragon, I.
Name: Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics
Reference: European Polymer Journal (2001), 37(9), 1863-1869
Author: Eceiza, A.; de la Caba, K.; Gascon, V.; Corcuera, M. A.; Mondragon, I.
Name: The influence of molecular weight and chemical structure of soft segment in reaction kinetics with tolyl isocyanate
Reference: European Polymer Journal (2001), 37(8), 1685-1693
Author: Stefani, P. M.; Moschiar, S. M.; Aranguren, M. I.; Marieta, C.; Mondragon, I.
Name: Curing of epoxy-urethane copolymers in a heated mold: effect of the curing conditions on the phase-separation process
Reference: Journal of Applied Polymer Science (2001), 81(4), 889-900
Author: Harismendy, I.; Del Rio, M.; Marieta, C.; Gavalda, J.; Mondragon, I.
Name: Dicyanate ester-polyetherimide semi-interpenetrating polymer networks. II. Effects of morphology on the fracture toughness and mechanical properties
Reference: Journal of Applied Polymer Science (2001), 80(14), 2759-2767
Author: Ormaetxea, M.; Forcada, J.; Mugika, F.; Valea, A.; Martin, M. D.; Marieta, C.; Goyanes, S.; Mondragon, I.
Name: Ultimate properties of rubber and core-shell modified epoxy matrices with different chain flexibilities.
Reference: Journal of Materials Science (2001), 36(4), 845-852
Author: Tellez C A; Hollauer E; Pais da Silva M I; Mondragon; Haiduc I; Curtui M
Name: Density functional theory study of the fourier transform infrared and Raman spectra of dichloro-bis(2,4-pentanedionate)tin(IV)
Reference: Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy (2001), 57(6), 1149-61
Author: Goyanes, S. N.; Marconi, J. D.; Konig, P. G.; Martin, M. D.; Mondragon, I.
Name: Dynamical properties of epoxy composites filled with quartz powder
Reference: Journal of Alloys and Compounds (2000), 310(1-2), 374-377
Author: Harismendy, Isabel; Gomez, Clara M.; Del Rio, Marcos; Mondragon, Inaki
Name: Cure monitoring of catalyzed cyanate ester resins
Reference: Polymer International (2000), 49(7), 735-742
Author: Aierbe, G. Astarloa; Echeverria, J. M.; Martin, M. D.; Etxeberria, A. M.; Mondragon, I.
Name: Influence of the initial formaldehyde to phenol molar ratio (F/P) on the formation of a phenolic resol resin catalyzed with amine
Reference: Polymer (2000), 41(18), 6797-6802
Author: Mijovic, Jovan; Shen, Mingzhao; Sy, Jo Wing; Mondragon, Inaki
Name: Dynamics and Morphology in Nanostructured Thermoset Network/Block Copolymer Blends during Network Formation
Reference: Macromolecules (2000), 33(14), 5235-5244
Author: Sarrionandia, M.; Mondragon, I.; Moschiar, S. M.; Vazquez, A.
Name: Analysis of kinetic parameters of an urethane-acrylate resin for pultrusion process
Reference: Journal of Applied Polymer Science (2000), 77(2), 355-362
Author: Marieta, C.; del Rio, M.; Harismendy, I.; Mondragon, I.
Name: Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy
Reference: European Polymer Journal (2000), 36(7), 1445-1454
Author: Aizpurua, B.; Franco, M.; Corcuera, M. A.; Riccardi, C. C.; Mondragon, I.
Name: Chemorheology and ultimate behavior of epoxy-amine mixtures modified with a liquid oligomer
Reference: Journal of Applied Polymer Science (2000), 76(8), 1269-1279
Author: Harismendy, I.; Rio, M. Del; Eceiza, A.; Gavalda, J.; Gomez, C. M.; Mondragon, I.
Name: Morphology and thermal behavior of dicyanate ester-polyetherimide semi-IPNS cured at different conditions
Reference: Journal of Applied Polymer Science (2000), 76(7), 1037-1047
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Vazquez, A.; Mondragon, I.
Name: Influence of the amount of catalyst and initial pH on the phenolic resol resin formation
Reference: Polymer (2000), 41(9), 3311-3315
Author: Martinez, I.; Martin, M. D.; Eceiza, A.; Oyanguren, P.; Mondragon, I.
Name: Phase separation in polysulfone-modified epoxy mixtures. Relationships between curing conditions, morphology and ultimate behavior
Reference: Polymer (1999), Volume Date 2000, 41(3), 1027-1035
Author: Eceiza, A.; Zabala, J.; Egiburu, J. L.; Corcuera, M. A.; Mondragon, I.; Pascault, J. P.
Name: Reaction kinetics of tolyl isocyanate with polyhexamethylene-pentamethylene carbonate diol
Reference: European Polymer Journal (1999), 35(11), 1949-1958
Author: Oyanguren, P. A.; Aizpurua, B.; Galante, M. J.; Riccardi, C. C.; Cortazar, O. D.; Mondragon, I.
Name: Design of the ultimate behavior of tetrafunctional epoxies modified with polysulfone by controlling microstructure development
Reference: Journal of Polymer Science, Part B: Polymer Physics (1999), 37(19), 2711-2725
Author: Remiro, P. M.; Riccardi, C. C.; Corcuera, M. A.; Mondragon, I.
Name: Design of morphology in PMMA-modified epoxy resins by control of curing conditions I. Phase behavior
Reference: Journal of Applied Polymer Science (1999), 74(4), 772-780
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC. III: zinc acetate
Reference: Polymer (1999), 40(21),5873-5878
Author: De La Caba, K.; Guerrero, P.; Gavalda, J.; Mondragon, I.
Name: Fracture behavior-morphology relationships in an unsaturated polyester resin modified with a liquid oligomer
Reference: Journal of Polymer Science, Part B: Polymer Physics (1999), 37(14), 1677-1685
Author: Franco, M.; Mondragon, I.; Bucknall, C. B.
Name: Blends of epoxy resin with amine-terminated polyoxypropylene elastomer: morphology and properties
Reference: Journal of Applied Polymer Science (1999), 72(3), 427-434
Author: Valea, A.; Gonzalez, M. L.; Mondragon, I.
Name: Vinyl ester and unsaturated polyester resins in contact with different chemicals: dynamic mechanical behavior
Reference: Journal of Applied Polymer Science (1999), 71(1), 21-28
Author: Martin, M. D.; Ormaetxea, M.; Harismendy, I.; Remiro, P. M.; Mondragon, I.
Name: Cure chemo-rheology of mixtures based on epoxy resins and ester cyanates
Reference: European Polymer Journal (1998), Volume Date 1999, 35(1), 57-68.
Author: Valea, A.; Martinez, I.; Gonzalez, M. L.; Eceiza, A.; Mondragon, I.
Name: Influence of cure schedule and solvent exposure on the dynamic mechanical behavior of a vinyl ester resin containing glass fibers
Reference: Journal of Applied Polymer Science (1998), 70(13), 2595-2602
Author: Marieta, C.; Mondragon, I.
Name: Adhesion at the carbon fiber/matrix interface of composites
Reference: Revista de Plasticos Modernos (1998), 76(507), 300-307.
Author: Harismendy, I.; Miner, R.; Valea, A.; Llano-Ponte, R.; Andres, M. A.; Mondragon, I.
Name: Relationships between chemical structure and fracture behavior of several epoxy mixtures
Reference: Journal of Polymer Materials (1998), 15(2), 205-213
Author: Mondragon, I.; Remiro, P. M.; Martin, M. D.; Valea, A.; Franco, M.; Bellenguer, V.
Name: Viscoelastic behavior of epoxy resins modified with poly(methyl methacrylate)
Reference: Polymer International (1998), 47(2), 152-158
Author: Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Design of mechanical behavior in PMMA-modified epoxy resins by control of phase separation
Reference: Polymeric Materials Science and Engineering (1998), 79 160-161
Author: Remiro, P. M.; Riccardi, C. C.; Mondragon, I.
Name: Design of mechanical behavior in PMMA-modified epoxy resins by control of phase separation
Reference: Book of Abstracts, 216th ACS National Meeting, Boston, August 23-27 (1998), PMSE-082
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Martin, M. D.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC. 2. barium hydroxide
Reference: Polymer (1998), 39(15), 3467-3472
Author: Astarloa-Aierbe, G.; Echeverria, J. M.; Egiburu, J. L.; Ormaetxea, M.; Mondragon, I.
Name: Kinetics of phenolic resol resin formation by HPLC
Reference: Polymer (1998), 39(14), 3147-3153
Author: Valea, A.; Gonzalez, M. L.; Mondragon, I.
Name: Evaluation of a catalytic system for curing of vinyl ester resins
Reference: Revista de Plasticos Modernos (1998), 75(501), 279-282
Author: Mujika, F.; De Benito, A.; Atxega, M.; Fernandez, B.; Jauregi, M.; Nieto, P.; Mondragon, I.
Name: Interlaminar fracture behavior of modified epoxy matrix composites
Reference: Revista de Plasticos Modernos (1998), 75(501), 247-249
Author: Andres, M. A.; Garmendia, J.; Valea, A.; Eceiza, A.; Mondragon, I.
Name: Fracture toughness of epoxy resins modified with polyethersulfone: influence of stoichiometry on the morphology of the mixtures
Reference: Journal of Applied Polymer Science (1998), 69(1), 183-191
Author: Oyanguren, P. A.; Riccardi, C. C.; Williams, R. J. J.; Mondragon, I.
Name: Phase separation induced by a chain polymerization: polysulfone-modified epoxy/anhydride systems
Reference: Journal of Polymer Science, Part B: Polymer Physics (1998), 36(8), 1349-1359
Author: Caba, Koro De La; Guerrero, Pedro; Mondragon, Inaki; Kenny, Jose M.
Name: Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures
Reference: Polymer International (1998), 45(4), 333-338
Author: Harismendy, I.; Gomez, C.; Ormaetxea, M.; Martin, M. D.; Eceiza, A.; Mondragon, I.
Name: Effects of the catalyst concentration on the cure behavior of a dicyanate ester prepolymer
Reference: Journal of Polymer Materials (1997), 14(4), 317-323
Author: Harismendy, I.; Miner, R.; Valea, A.; Llano-Ponte, R.; Mujika, F.; Mondragon, I.
Name: Strain rate and temperature effects on the mechanical behavior of epoxy mixtures with different crosslink densities
Reference: Polymer (1997), 38(22), 5573-5577
Author: De la Caba, Koro; Guerrero, Pedro; Franco, Merche; Mondragon, Inaki
Name: The effect of temperature on the curing of unsaturated polyester resins modified with a liquid polymer
Reference: Macromolecular Symposia (1997), 114(Polymer-Solvent Complexes), 271-277
Author: Corcuera, M. A.; Mondragon, I.; Riccardi, C. C.; Williams, R. J. J.
Name: Polymer networks derived from the anhydride curing of tetraepoxides
Reference: Journal of Applied Polymer Science (1997), 64(1), 157-166
Author: De La Caba, K.; Guerrero, P.; Eceiza, A.; Mondragon, I.
Name: Kinetic and rheological studies of two unsaturated polyester resins cured at different temperatures
Reference: European Polymer Journal (1997), 33(1), 19-23
Author: Franco, M.; Corcuera, M. A.; Gavalda, Jna.; Valea, A.; Mondragon, I.
Name: Influence of curing conditions on the morphology and physical properties of epoxy resins modified with a liquid polyamine
Reference: Journal of Polymer Science, Part B: Polymer Physics (1997), 35(2), 233-240
Author: Guerrero, P.; De la Caba, K.; Valea, A.; Corcuera, M. A.; Mondragon, I.
Name: Influence of cure schedule and stoichiometry on the dynamic mechanical behavior of tetrafunctional epoxy resins cured with anhydrides
Reference: Polymer (1996), 37(11), 2195-2200
Author: Fdez. de Nograro, F.; Llano-Ponte, R.; Mondragon, I.
Name: Dynamic and mechanical properties of epoxy networks obtained with PPO based amines/mPDA mixed curing agents
Reference: Polymer (1996), 37(9), 1589-1600
Author: Garmendia, J.; Alcorta, C.; Llano-Ponte, R.; Mondragon, I.
Name: Viscoelastic and mechanical properties of epoxy/mixed amine systems. Influence of stoichiometry and cure conditions
Reference: Polymers & Polymer Composites (1996), 4(1), 25-33
Author: de la Caba, K.; Guerrero, P.; Eceiza, A.; Mondragon, I.
Name: Kinetic and rheological studies of an unsaturated polyester cured with different catalyst amounts
Reference: Polymer (1996), 37(2), 275-80
Author: Fernandez-Nograro, F.; Valea, A.; Llano-Ponte, R.; Mondragon, I.
Name: Dynamic and mechanical properties of DGEBA/poly(propylene oxide) amine based epoxy resins as a function of stoichiometry
Reference: European Polymer Journal (1996), 32(2), 257-66
Author: Mijovic, Jovan; Andjelic, Sasa; Fitz, Benjamin; Zurawsky, Walter; Mondragon, Inaki; Bellucci, Francesco; Nicolais, Luigi
Name: Impedance spectroscopy of reactive polymers. 3. Correlations between dielectric, spectroscopic, and rheological properties during cure of a trifunctional epoxy resin
Reference: Journal of Polymer Science, Part B: Polymer Physics (1996), 34(2), 379-88
Author: Gonzalez, J.; Murillo, N.; Mondragon, I.; Blanco, J. M.; Echeberria, J.; Gonzalez, E.; Gonzalez, J. M.
Name: Influence of Cr addition on the magnetic softness of nanocrystalline FeCuNbSiB alloys
Reference: Scripta Metallurgica et Materialia (1995), 33(10/11), 1757-64
Author: Garmendia, J.; Olaizola, M.; Etxeberria, I.; Franco, J. C.; Mondragon, I.
Name: Influence of processing and testing conditions on the mechanical behavior of sheet-molding compound laminates
Reference: Journal of Materials Science (1995), 30(20), 5287-94
Author: Etxeberria, I.; Franco, J. C.; Valea, A.; Llano-Ponte, R.; Mondragon, I.
Name: Influence of solvent absorption on the mechanical behavior of SMC laminates
Reference: Journal of Reinforced Plastics and Composites (1995), 14(9), 988-1007
Author: Mondragon, I.; Quintard, I.; Bucknall, C. B.
Name: Effects of cure schedule and stoichiometry on the dynamic mechanical behavior of epoxy resin modified with polyethersulfone
Reference: Plastics, Rubber and Composites Processing and Applications (1995), 23(5), 331-8
Author: Meyer, Fred; Sanz, Genoveva; Eceiza, Arantxa; Mondragon, Inaki; Mijovic, Jovan
Name: The effect of stoichiometry and thermal history during cure on structure and properties of epoxy networks
Reference: Polymer (1995), 36(7), 1407-14
Author: De Nograro, F. F.; Guerrero, P.; Corcuera, M. A.; Mondragon, I.
Name: Effects of chemical structure of hardener on curing evolution and on the dynamic mechanical behavior of epoxy resins
Reference: Journal of Applied Polymer Science (1995), 56(2), 177-92
Author: Sanz, G.; Garmendia, J.; Andres, M. A.; Mondragon, I.
Name: Dependence of dynamic mechanical behavior of DGEBA/DDM stoichiometric epoxy systems on the conditions of curing process
Reference: Journal of Applied Polymer Science (1995), 55(1), 75-87
Author: Mondragon, I.; Bucknall, C. B.
Name: Effects of residual dichloromethane solvent on the cure of epoxy resin
Reference: Plastics, Rubber and Composites Processing and Applications (1994), 21(5), 275-81
Author: Imaz, J. J.; Valea, A.; Cortazar, M.; Mondragon, I.
Name: Correlations between rheological and thermal behavior of TGDDM/m-PDA epoxy systems
Reference: European Polymer Journal (1994), 30(5), 561-5
Author: Imaz, J. J.; Ezeiza, A.; Mondragon, I.
Name: Rheological parameters of tetraglycidyl-4,4-diaminodiphenylmethane/m-phenylenediamine system
Reference: Elhuyar (1992), 18(1-2), 131-7
Author: Beloki, J.; Ezeiza, A.; Mondragon, I.
Name: Modification of epoxy systems by polycarbonate of bisphenol A
Reference: Elhuyar (1992), 18(1-2), 125-30
Author: Corcuera, M. A.; Andres, M. A.; Sarasua, R.; Mondragon, I.
Name: Rheological and mechanical behavior of tetraglycidyldiaminodiphenylmethane (TGDDM)/anhydride epoxy systems
Reference: Polymer International (1992), 29(2), 97-102
Author: Imaz, J. J.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Physical and mechanical behavior of tetraglycidyldiaminodiphenyl methane (TGDDM)/m-phenylenediamine (m-PDA) epoxy systems
Reference: Journal of Applied Polymer Science (1992), 46(1), 147-66
Author: Imaz, J. J.; Markaide, N.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Rheological characterization of tetraglycidyl 4,4-diaminodiphenylmethane/m-phenylenediamine systems
Reference: European Polymer Journal (1992), 28(3), 299-303
Author: Corcuera, M. A.; Lozano, C.; Mondragon, I.
Name: Anhydrides as hardeners in curing of epoxy resins
Reference: Revista de Plasticos Modernos (1991), 62(422), 248-54
Author: Imaz, J. J.; Rodriguez, J. L.; Rubio, A.; Mondragon, I.
Name: Hydrothermal environment influence on water diffusion and mechanical behavior of carbon fiber-epoxy laminates
Reference: Journal of Materials Science Letters (1991), 10(11), 662-5
Author: Imaz, J. J.; Markaide, N.; Rubio, A.; Llano-Ponte, R.; Valea, A.; Mondragon, I.
Name: Physicorheological study of the tetraglycidyl-4,4-diaminodiphenylmethane/m-phenylenediamine system
Reference: Journ. Natl. Compos., 7th (1990), 763-73
Author: Beloki, J.; Jurado, M. J.; Corcuera, M. A.; Mondragon, I.
Name: Addition of technical thermoplastic to epoxy resins for use in composites C.-R
Reference: Journ. Natl. Compos., 7th (1990), 111-21
Author: Valea Perez, A.; Gonzalez, M. L.; Mondragon, I.
Name: Influence of the thickening agents and some external parameters to the formulation on the viscosimetric kinetics of the preimpregnated polyester
Reference: Dev. Sci. Technol. Compos. Mater., Eur. Conf. Compos. Mater., 3rd (1989), 57-62
Author: Mondragon, I.; Imaz, J.; Rubio, A.; Valea, A.
Name: Moisture absorption influence on the mechanical properties of carbon/epoxy composites
Reference: Dev. Sci. Technol. Compos. Mater., Eur. Conf. Compos. Mater., 3rd (1989), 643-8
developed by: BIT&MINA